Top
ETERNUS SF Storage Cruiser 14.0 User's Guide

B.9.3 Storage properties


B.9.3.1 ETERNUS storage

Table B.66 Storage (device) properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

Any character string

Displays a storage name as an icon name.

Status Description

Any character string

Indicates detailed device status.

Status

"normal",
"warning",
"error",
"unknown"

Indicates the device status.

When the monitoring status is "unmonitored" or "undefined", status becomes "unknown".

Monitoring Status

"normal",
"unmonitored",
"undefined",
"invalid Password"

Indicates the level of recognition of a device by this software.

"normal" indicates that the device is recognized normally.

"unmonitored" indicates that the device is registered with this software but cannot be recognized for operation with a LAN.

"undefined" indicates that operation of the device in a LAN has been verified, though the device is not registered with this software.

In the event of "invalid Password", change the device password stored by this software. Select [Device] - [Change account for device management] from the resource view menu.

Vender ID

Any character string

Indicates a manufacturer's name.

Product ID

Any character string

Indicates a product name.

IP Address

IP address

Indicates the device IP address in a LAN. If multiple IP addresses are displayed, they are separated by a period ("."). as their delimiter

Management Software

Any character string

Indicates the Management Software used.

The value is set from the resource view is used.

Storage Information

Storage Type

"Disk",
"Tape",
"Array",
"Library"

Indicates the storage type.

Serial Number

Serial number

Indicates a storage device serial number.

Firm Version

Any character string

Indicates the storage device firmware version number.

BOX ID

Device ID

Indicates the device ID of storage. (ETERNUS series and GR series only)

Events

-

Any character string

The same information as that of the properties of the Domain and Side views is displayed.

Memo pad

Manager

Any character string

The same information as that of the properties of the Domain and Side views is displayed.

Location

Any character string

The same information as that of the properties of the Domain and Side views is displayed.

Memo

Any character string

The same information as that of the properties of the Domain and Side views is displayed.


Table B.67 CA properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

Any character string

Indicates a CA name as an icon name.

For details, see "A.2 Module Element Notations and Mounting Location of Storage Devices".

Status

"normal",
"warning",
"error",
"fatal",
"unknown"

Indicates the status of a channel adapter (CA).

When the monitoring status is "unmonitored" or "undefined", status becomes "unknown".

Status Description

Any character string

Indicates the CA status in detail.

Monitoring Status

Any character string

Indicates the CA monitoring status.

Adapter Information

CA No.

Decimal number

Indicates a CA number.

For the ETERNUS6000 series, the value is the slot number (0-3) in Router.

For the GR740, GR820, GR840, the value is the slot number (0 or 1) in IOB.

For the ETERNUS8000, ETERNUS4000, ETERNUS3000, GR710, GR720, GR730, the value is the CA slot number in CM.

Group No.

0,
1

Indicates the group number (CM number for the ETERNUS8000, ETERNUS4000, ETERNUS3000, GR710, GR720, GR730. Router number for the ETERNUS6000, GR740, GR820, GR840) of the storage side where a CA is mounted.

Exchange Unit Name

Any character string

Indicates the unit name for CA replacement unit. Channel adapters with the same name are affected by hot system replacement.


Table B.68 Port properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

Any character string

Indicates a port identification name as an icon name.

(Example: CA0x00:Port0)

For details, see "A.2 Module Element Notations and Mounting Location of Storage Devices".

Status

"normal",
"warning",
"error",
"fatal",
"unknown"

Indicates the FC port status.

When the monitoring status is "unmonitored" or "undefined", status becomes "unknown".

Status Description

Any character string

Indicates the FC port status in detail.

Monitoring Status

Any character string

Indicates the FC port monitoring status.

Port Information-1

Port No.

Decimal number

Indicates the FC port index number within a channel adapter (CA).

WWPN

Eight-byte WWPN

Indicates the WWPN (World Wide Port Name) set for an FC port.

WWNN

Eight-byte WWNN

Indicates the WWNN (World Wide Node Name) set for an FC port.

Adapter Type

"FCCA",
"FCRA(initiator)",
"FCRA(target)",
"FCRA(Automatic)",
"FC-Initiator"

Indicates the FC port type.

Supported FC Port Types

"N",
"NL-Private",
"NL-Public",
"E",
"F",
"FL",
"B",
"G"

Indicates the Fibre Channel port types supported by an FC port.

Current FC Port Type

"N",
"NL-Private",
"NL-Public",
"E",
"F",
"FL",
"B",
"G"

Indicates the type of Fibre Channel port for which an FC port is currently active.

Supported FC Classes

"Class2",
"Class3",
"Class2(Enable ACK0)"

Indicates the service class of Fibre Channel supported by an FC port.

Current FC Class

"Class2",
"Class3",
"Class2(Enable ACK0)"

Indicates the Fibre Channel service class set for an FC port.

Port Information-2

FC Loop ID Assignment

"Manual",
"Automatic (Ascending order)",
"Automatic (Descending order)"

Indicates the loop ID setup method of Fibre Channel settings for an FC port. This property is valid only for a loop connection.

FC Loop ID

Decimal number

Indicates the loop ID of Fibre Channel settings for an FC port. This property is valid only for a loop connection.

Transfer Rate

"Automatic",
"1Gbit/s",
"2Gbit/s",
"4Gbit/s",
"8Gbit/s",
"Unknown"

Indicates the transfer rate set for an FC port. When it is unknown, "Unknown" is displayed.

When it is "Automatic", the transfer rate is either of the followings:
10Gbit/s, 8Gbit/s, 4Gbit/s, 2Gbit/s, 1Gbit/s

Connected WWPN

Eight-byte WWPN

Indicates the WWPN (World Wide Port Name) of a remote node connected to this FC port. This property is not displayed for unsupported devices. In ETERNUS8000, ETERNUS6000, ETERNUS4000 and ETERNUS2000, this property is not indicated.

Affinity Information

Security Mode

"on",
"off"

Indicates the security setting status of an FC port.

Authorized WWPN

Eight-byte WWPN

Indicates the WWPN (World Wide Port Name) of an HBA connected to an access path that is set.

AffinityGroup Name

Any character string

Indicates the affinity group name (zone name) of storage assigned to the above Authorized WWPN.

Host Response Number

Decimal number

Indicates the host response number assigned to the HBA indicated by the Authorized WWPN. (This item is displayed for a device that supports the host response setting function.)

For information about the host response function, refer to the "ETERNUSmgr/GRmgr User's Guide".

Remote Copy

Destination FCRA WWPN

Eight-byte WWPN

Indicates the WWPN (World Wide Port Name) of the destination FCRA (remote connection adapter) that is route-set with the remote copy function. This tab and "Properties" are displayed only for the FCRA.


Table B.69 DA properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

Any character string

Indicates a Device Adapter(DA) name as an icon name.

For details, see "A.2 Module Element Notations and Mounting Location of Storage Devices". (Example: DA0x10)

Status

"normal",
"warning",
"error",
"fatal",
"unknown"

Indicates the device adapter (DA) status.

Status Description

Any character string

Indicates the DA status in detail.

Device Adapter Information

DA No.

Decimal number

Indicates a DA number.

For the ETERNUS6000, the value is the slot number (0-1) in the router.

For the GR740, GR820, GR840, the value is the slot number (generally 2) in IOB.

For ETERNUS4000 models 80 and 100, ETERNUS3000, GR710, GR720, GR730, the value is the DA slot number (0 or 1) in CM.

Group No.

Value

Indicates a group number (CM number for the ETERNUS4000 models 80 and 100, ETERNUS3000 series and GR710, GR720, GR730, and Router number for the ETERNUS6000, GR740, GR820, GR840) of the storage side where a DA is mounted.

Exchange Unit Name

Any character string

Indicates the unit name for DA exchange. Adapters with the same name are affected by hot system replacement.

Controlled DE ID

Hexadecimal number

Indicates the ID number of Device Enclosure (DE) controlled with DA.


Table B.70 CM properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"CM" + number

Indicates a CM name as an icon name.

For details, see "A.2 Module Element Notations and Mounting Location of Storage Devices". (Example: CM0x00)

The value is represented in hexadecimal number.

Status

"normal",
"warning",
"error",
"fatal",
"unknown"

Indicates the device CM (Controller) status.

Status Description

Any character string

Indicates the CM status in detail.

Controller Information

CM No.

Decimal number

Indicates CM number.

The number becomes a serial number from 0.

Cache Capacity

Memory size(MB)

Indicates cache memory size of CM.


Table B.71 Router properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"Router" + number

Indicates a router name as an icon name.

For details, see "A.2 Module Element Notations and Mounting Location of Storage Devices". (Example: Router0/Router0x00)

Status

"normal",
"warning",
"error",
"fatal",
"unknown"

Indicates the router status.

Status Description

Any character string

Indicates the router status in detail.

Router Information

Router No.

Decimal number

Indicates a router number.


Table B.72 IOB properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"IOB" + number

Indicates an IOB name as an icon name.

For details, see "A.2 Module Element Notations and Mounting Location of Storage Devices". (Example: IOB0x00)

The number is hexadecimal.

Status

"normal",
"warning",
"error",
"fatal",
"unknown"

Indicates the IOB status.

Status Description

Any character string

Indicates the IOB status in detail.

IOB Information

IOB No.

Hexadecimal number

Indicates an IOB number.


Table B.73 LUNMapping properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"LUNMapping"

Indicates a LUNMapping name as an icon name.

For the ETERNUS8000, ETERNUS6000, ETERNUS4000, ETERNUS2000, the LUNMapping icon is displayed using ETERNUSmgr.

For the ETERNUS3000 model 50, GR710, GR720, GR730, the LUNMapping icon is displayed using ETERNUSmgr, GRmgr addressing mode with zone setting.

Mapping Information

Group Name

Any character string

Indicates an arbitrary name of LUNMapping. When the name has not been set, it is not displayed.

For ETERNUS3000 model 50, GR710, GR720, GR730, indicates the zone name set by the zone setting function in the addressing mode of ETERNUSmgr, GRmgr.


Table B.74 AffinityGroup properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"AffinityGroup" + group name

Indicates an AffinityGroup name as an icon name.

Affinity Group Information

Group No.

Decimal number

Indicates an AffinityGroup number. The value is a zone number for the ETERNUS4000 models 80 and 100, ETERNUS3000, GR series.

Group Name

Any character string

Indicates the affinity group name (zone name).


Table B.75 LUN properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"LUN" + number

Indicates a LUN name as an icon name.

The number is decimal.


Table B.76 LUN integration icon properties and table element information

Tab name

Name of display item

Value

Description

Remarks

Integration

Basic Information

(Icon Name)

"LUN" + number

Indicates the integrated LUN number.

The number is decimal.

LUN Fusion Information

LUN No.

Number

The list of the integrated LUN numbers.

The number is decimal.

LUN

"LUN" + number

LUN number. The number is decimal.

Logical Volume

"Logical Volume" + number

Indicates a logical volume number which corresponds to mapped LUN. The number is hexadecimal.

Capacity

Volume capacity(MB)

Indicates capacity of Logical Volume.

Volume Type

"Open Volume",
"Main Frame Volume",
"MVV",
"SDV",
"TempOLU",
"TempSDV",
"SDPV"

Indicates the logical volume type (for opening, main frame, sharing,Snapping Data Volume, TempOLU, TempSDV, SDPV).

Encryption

"Encryption",
"Non-Encryption"

Indicates the logical volume encryption attribute.

RAID Group

"RAID Group" + number

RAID Group number (in hexadecimal format) corresponding to Logical Volume.

Blank is displayed if the device has a Thin Provisioning configuration and the RAID group belongs to the Thin Provisioning Pool.

Thin Provisioning Pool

"TPP" + number

Integrated Thin Provisioning Pool number (in hexadecimal format).

Blank is displayed if there is a Thin Provisioning configuration but no Thin Provisioning Pool.

A hyphen (-) is displayed if there is not a Thin Provisioning configuration or if the information cannot be acquired.

Table Element

LUN

"LUN" + number

Indicates integrated LUN number. The number is decimal.


Table B.77 Logical Volume properties

Tab name

Name of display name

Value

Description

Remarks

Basic Information

(Icon Name)

"Logical Volume" + number

Indicates a logical volume name as an icon name.

The number is hexadecimal.

Logical Volume Fusion Information

Capacity

Volume capacity(MB)

Indicates the capacity of a logical volume.

Volume Type

"Open Volume",
"Main Frame Volume",
"MVV",
"SDV",
"TempOLU",
"TempSDV",
"SDPV",
"TPV"

Indicates the type of logical volume (for opening, main frame, sharing, Snapping Data Volume, TempOLU, TempSDV, SDPV,TPV).

Encryption

"Encryption",
"Non-Encryption"

Indicates the logical volume encryption attribute.


Table B.78 Logical Volume integration icon properties and table element information

Tab name

Name of display item

Value

Description

Remarks

Integration

Basic Information

(Icon Name)

"Logical Volume" + number

Indicates an integrated logical volume number.

The number is hexadecimal.

Logical Volume Fusion Information

Logical Volume No.

Number

Indicates the list of integrated logical volume numbers.

The number is hexadecimal.

Logical Volume

"Logical Volume" + number

Indicates a logical volume number.

The number is hexadecimal.

Capacity

Volume capacity(MB)

Indicates capacity of the logical volume.

Volume Type

"Open Volume",
"Main Frame Volume",
"MVV",
"SDV",
"TempOLU",
"TempSDV",
"SDPV",
"TPV"

Indicates the logical volume type (for opening, main frame and sharing, Snapping Data Volume, TempOLU, TempSDV, SDPV,TPV).

Encryption

"Encryption",
"Non-Encryption"

Indicates the logical volume encryption attribute.

Table Element

Logical Volume

"Logical Volume" + number

Indicates the list of integrated logical volume numbers.

The number is hexadecimal.


Table B.79 Thin Provisioning volume properties

Tab name

Name of display item

Value

Description

Remarks

Basic information

(Icon name)

"LogicalVolume" + Number

Logical volume name (displayed as the icon name in hexadecimal format).


Logical volume

Name

Character string

Logical volume name set by the user.


Capacity

Volume capacity (MB)

Logical volume capacity.


Used Capacity

Capacity used (MB)

Used capacity.


Volume Type

"Open volume", "Mainframe volume","MVV", "SDV", "TempOLU","TempSDV", "SDPV",
"TPV"

Logical volume type (for open, mainframe, shared, Snap Data Volume, TempOLU, TempSDV, SDPV,TPV)


Encryption

"Encryption"、
"Non-Encryption"

Logical volume encryption usage.


Notice Status

"Normal",

"Caution"

Monitoring status of the logical volume capacity. Possible values:

-Normal: Volume free space is less than "Caution threshold value".

-Caution: Volume free space is greater than or equal to "Caution threshold value".


Notice(Caution)

Threshold value (%)

"Caution threshold value" set for the logical volume.



Table B.80 Thin Provisioning volume integration icon properties and table element information

Tab name

Name of display item

Value

Description

Remarks

Integration

Basic information

(Icon name)

"LogicalVolume" + number

Integrated logical volume number (in hexadecimal format).

Thin Provisioning Volume Fusion Information

Logical Volume No.

Number

List of integrated logical volume numbers (in hexadecimal format).

Logical Volume

"LogicalVolume" + number

Logical volume number (in hexadecimal format).

Name

Character string

Logical volume name set by the user.

Capacity

Logical volume capacity (MB)

Logical volume capacity.

Used Capacity

Capacity used (MB)

Used capacity.

VolumeType

"Open volume", "Mainframe volume", "MVV", "SDV", "TempOLU", "TempSDV", "SDPV",
"TPV"

Logical volume type (for open, mainframe, shared, Snap Data Volume, TempOLU, TempSDV, SDPV,TPV)

Encryption

"Encryption",
"Non-Encryption"

Logical volume encryption attribute.

Notice Status

"Normal"、
"Warning"

Monitoring status of the logical volume capacity. Possible values:

-Normal: Volume free space is less than "Caution threshold value".

-Caution: Volume free space is greater than or equal to "Caution threshold value".

Notice(Caution)

Threshold value (%)

"Caution threshold value" set for the logical volume.

Table element

Logical volume

"LogicalVolume" + number

List of integrated logical volume numbers (in hexadecimal format).

Table B.81 Thin Provisioning Pool properties

Tab name

Name of display item

Value

Description

Remarks

Basic information

(Icon name)

"TPP" + number

Thin Provisioning Pool name (displayed as the icon name in 4-digit hexadecimal format).

Device status

"normal", "warning",  "error","fatal", "unknown"

Thin Provisioning Pool status.

Device details

Character string

Detailed information on Thin Provisioning Pool status.

Thin Provisioning Pool Information

Name

Character string

Thin Provisioning Pool name set by the user.

Capacity

Total capacity (MB)

Thin Provisioning Pool total capacity.

Used Capacity

Capacity used (MB)

Capacity allocated to the logical volume.

Disks Kind

"Online"、
"Nearline"、
"Unknown"

Attributes of the disks that comprise the Thin Provisioning Pool.

Reliability

"High"、
"Medium、
"None"、
"Unknown"

Thin Provisioning Pool reliability.

Encryption

"Encryption",
"Non-Encryption"

Encryption attribute.

Notice Status

"Normal",
"Warning",
"Caution"

Monitoring status of the used Thin Provisioning Pool capacity. Possible values:

-Normal: Used Thin Provisioning Pool capacity is less than "Caution threshold value".

-Caution: Used Thin Provisioning Pool capacity is less than "Warning threshold value" and greater than or equal to "Caution threshold value".

Notice(Warning)

Threshold value (%)

"Warning threshold value" set for the Thin Provisioning Pool.

This value is a strong warning level indicating the Thin Provisioning Pool capacity already allocated.

Notice(Caution)

Threshold value (%)

"Caution threshold value" set for the Thin Provisioning Pool.

This value is a weak warning level indicating the Thin Provisioning Pool capacity already allocated.

Thin Provisioning Volume Information

Logical Volume(Mainframe)

"-"

A hyphen (-) is displayed, since there is no information,

Logical Volume(TPV)

Volume number

TPV Volume number.

Part

Numeric+"/"+ Numeric

Logical volume integration information.

Values are displayed as <integration_order_number>/ <integration_total_number>.

"1/1" is displayed for Thin Provisioning volumes.

Capacity

Capacity (MB)

Logical volume capacity.

Volume Type

"Open volume", "Mainframe volume", "MVV", "SDV", "TempOLU", "TempSDV", "SDPV"

Logical volume type (for open, mainframe, shared, Snap Data Volume, TempOLU, TempSDV, SDPV).

Encryption

"Encryption",
"Non-Encryption"

Encryption usage.


Table B.82 Thin Provisioning Pool integration icon properties and table element information

Tab name

Name of display item

Value

Description

Remarks

Integration

Basic information

(Icon name)

"TPP" + number

Integrated Thin Provisioning Pool number (in hexadecimal format).

Pool Fusion Information

Thin Provisioning Pool

"TPP" + number

Thin Provisioning Pool number (in hexadecimal format).

Status

"normal", "warning", "error",
"fatal", "unknown"

Thin Provisioning Pool status.

Statis Description

Character string

Detailed information on Thin Provisioning Pool status.

Name

Character string

Thin Provisioning Pool name set by the user.

Capacity

Total capacity (MB)

Thin Provisioning Pool total capacity.

Used Capacity

Capacity used (MB)

Capacity allocated to the logical volume.

Disks Kind

"Online", "Nearline", "Unknown"

Attributes of the disks that comprise the Thin Provisioning Pool.

Reliability

"High", "Medium",
"None", "Unknown"

Thin Provisioning Pool reliability.

Encryption

"Encryption",
"Non-Encryption"

Encryption usage.

Notice Status

"Normal", "Warning", "Caution"

Monitoring status of the Thin Provisioning Pool capacity. Possible values:

-Normal: Used Thin Provisioning Pool capacity is less than "Caution threshold value".

-Caution: Used Thin Provisioning Pool capacity is less than "Warning threshold value" and greater than or equal to "Caution threshold value".

-Warning: Used Thin Provisioning Pool capacity is greater than or greater to "Warning threshold value".

Notice(Warining)

Threshold value (%)

"Warning threshold value" set for the Thin Provisioning Pool.

This value is a strong warning level indicating the Thin Provisioning Pool capacity already allocated.

Notice(Caution)

Threshold value (%)

"Caution threshold value" set for the Thin Provisioning Pool.

This value is a weak warning level indicating the capacity already allocated.

Table element

Thin Provisioning Pool

"TPP"+number

List of the integrated Thin Provisioning Pool number (in hexadecimal format).


Table B.83 RAID Group properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"RAID Group" + number

Indicates a RAID group name as an icon name.

The number is hexadecimal.

Status

"normal",
"warning",
"error",
"unknown"

Indicates the RAID group status.

Status Description

Any character string

Indicates the RAID group status in detail.

RAID Group Information

RAID level

"RAID0",
"RAID1+0",
"RAID1",
"RAID3",
"RAID5",
"RAID5+0",
"RAID6"

Indicates the RAID level of a RAID group.

Capacity

Total capacity(MB)

Indicates the total volume capacity of a RAID group.

Free Capacity

Free capacity(MB)

Indicates the free capacity not assigned to a logical volume in a RAID group.

Stripe Size

Decimal number(KB)

Indicates the stripe size of a RAID group.

Assigned CM No.

CM number

Indicates the CM number for controlling this RAID group. When there is no information and information are uncertain, "-" (hyphen) is displayed.

Assigned CPU No.

CPU number

Indicates the CPU number for controlling this RAID group. When there is no information and information are uncertain, "-" (hyphen) is displayed.

Format Progress

"Formatting",
"Abnormal End of Formatting",
"Reforming",
"Abnormal End of Reforming",
"-"

Indicates the formatting status, RAID level exchange, and the RAID group capacity expansion status. "-" (hyphen) is displayed if these operations are not performed and when they complete normally.

Disk Status

"Active",
"Idle",
"In the boot process",
"In the stop process",
""

Indicates the disk status of the RAID group.

When the device cannot be supported or device information cannot be collected, "-" (hyphen) is displayed.

D. Hot Spare

"DE" + 0xDE number + ": " + "Disk" + disk number

Information on the dedicated hot spare allocated to the RAID group.
Blank is displayed for RAID groups or devices with no dedicated hot spare.

Thin Provisioning Pool

"TPP" + number

Thin Provisioning Pool number belonging to the RAID group.
Displayed only if the device has a thin provisioning configuration and has a Thin Provisioning Pool.

Logical Volume Information

RAID Level

"RAID0",
"RAID1+0",
"RAID1",
"RAID3",
"RAID5",
"RAID5+0",
"RAID6"

Indicates the RAID level of a RAID Group.

Capacity

Total capacity(MB)

Indicates the total volume capacity of RAID Group.

Free Capacity

Free Capacity(MB)

Indicates the empty capacity not allocated in a logical volume in the RAID Group.

Logical Volume

"Logical Volume" + number

Indicates the logical volume number constructed in RAID.

The number is hexadecimal.

Capacity

Capacity(MB)

Indicates the logical volume capacity.

Volume Type

"Open Volume",
"Main Frame Volume",
"MVV",
"SDV",
"TempOLU",
"TempSDV",
"SDPV"

Indicates the logical volume type (for opening, main frame and sharing, Snapping Data Volume, TempOLU, TempSDV, SDPV).

Encryption

"Encryption",
"Non-Encryption"

Indicates the logical volume encryption attribute.

Logical Volume
(Mainframe)

"Logical Volume" + number

Indicates the mainframe logical volume number.

Logical Volume
(Open)

"Logical Volume" + number

Indicates the open logical volume number.

Part

Number+"/"+number

Indicates logical volume integration information. The value is shown as integration order number+"/"+integration total number.
For example, 1/1 indicates a volume that is not integrated, and 3/8 indicates that the relevant logical volume is composed of eight data areas and the information is for the third area.

Note: Logical volume information is not displayed if the configuration has thin provisioning volumes.


Table B.84 RAID Group integration icon properties and table element information

Tab name

Name of display item

Value

Description

Remarks

Integration

Basic Information

(Icon Name)

"RAID Group" + number

Indicates the integrated RAID group number.
The number is in hexadecimal.

RAID Group Information

RAIDGroup

"RAID Group" + number

Indicates the RAID group number.
The number is in hexadecimal.

Status

"normal",
"warning",
"error",
"unknown"

Indicates the RAID group status.

Status Description

Any character string

Indicates the RAID group status in detail.

RAID level

"RAID0",
"RAID1+0",
"RAID1",
"RAID3",
"RAID5",
"RAID5+0",
"RAID6"

Indicates the RAID level of a RAID group.

Capacity

Total capacity(MB)

Indicates the total volume capacity of a RAID group.

Free Capacity

Free capacity(MB)

Indicates the free capacity not assigned to a logical volume in a RAID group.

Stripe Size

Decimal number(KB)

Indicates the stripe size of a RAID group.

Assigned CM No.

CM number

Indicates the CM number for controlling this RAID group. When there is no information and information are uncertain, "-" (hyphen) is displayed.

Assigned CPU No.

CPU number

Indicates the CPU number for controlling this RAID group. When there is no information and information are uncertain, "-" (hyphen) is displayed.

Format Progress

"Formatting",
"Abnormal End of Formatting",
"Reforming", "Abnormal End of Reforming",
"-"

Indicates the formatting status, RAID level exchange, and the RAID group capacity expansion status. "-" (hyphen) is displayed if these operations are not performed and when they complete normally.

Disk Status

"Active",
"Idle",
"In the boot process",
"In the stop process",
""

Indicates the disk status of the RAID group.

When the device cannot be supported or device information cannot be collected, "-" (hyphen) is displayed.

D. Hot Spare

"DE" + 0xDE number + ": " + "Disk" + disk number

Information on the dedicated hot spare allocated to the RAID group.
Blank is displayed for RAID groups or devices with no dedicated hot spare.

Table Element

RAID Group

"RAIDGroup" + number

Indicates the integrated RAIDGroup number list. The number is in hexadecimal.


Table B.85 Disk Properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"DE" + 0xDE number + ": " + "Disk" + Disk number

The name is displayed in combination with the number of the DE where the disk is mounted and the slot number of the disk in the DE. (Example: DE0x00:Disk8)

The DE number is hexadecimal, and the disk slot number is decimal.

Device Status

"normal",
"warning",
"error",
"unknown"

Indicates the disk status.

Status Description

Any character string

Indicates the disk status in detail.

Disk Information

Disk Type

"Data Disk",
"Hot Spare Disk",
"D. Hot Spare",
"Backup Disk",
"System Disk"

Indicates the disk assignment type.

Disk Spec.

"Fibre Channel Disk",
"Nearline FC Disk",
"SAS Disk",
"Nearline SAS Disk",
"Nearline SATA Disk",
"SSD"

Indicates the disk type.
If unknown, the value is not displayed.

Capacity

Capacity(MB)

Indicates the user area capacity of the disk.(*)

Motor Status

"Active",
"Idle",
"In the boot process",
"In the stop process",
"-"

Indicates the motor status of the disk.

When the device cannot be supported or device information cannot be collected, "-" (hyphen) is displayed.

Vender ID

Any character string

Indicates the disk manufacturer's name.

Product ID

Any character string

Indicates the product name of the disk.

Firmware Version

Any character string

Indicates the firmware version number of the disk.

Rotational Speed

Number of rotations(RPM)

Indicates the disk rotation speed.

This property is invalid if "-" hyphen is displayed.

Capacity Type

Decimal number(GB) or Decimal number(TB)

Indicates the disk capacity type.

(*)NOTE: ETERNUS DX60, DX80, the physical disk capacity is displayed in the all disk. Also, ETERNUS DX60, DX80 Otherwise, the physical disk capacity is displayed in the system disk.


Table B.86 Disk integration icon properties and table element information

Tab name

Name of display item

Value

Description

Remarks

Integration

Basic Information

(Icon Name)

"DE" + 0xDE number + ": " + "Disk" + Disk number

Indicates the integrated disk name.

The name is displayed in combination with the number of the DE where the disk is mounted and the slot number of the disk in the DE. (Example: DE0x00:Disk8)

The DE number is hexadecimal, and the disk slot number is decimal.

Disk Fusion Information

Disk Fusion Information

"DE" + 0xDE number + ": " + "Disk" + Disk number

Indicates the integrated disk information.

Disk

"DE" + 0xDE number + ": " + "Disk" + Disk number

Indicates the integrated disk name.

The name is displayed in combination with the number of the DE where the disk is mounted and the slot number of the disk in the DE. (Example: DE0x00:Disk8)

The DE number is hexadecimal, and the disk slot number is decimal.

Device Status

"normal",
"warning",
"error",
"unknown"

Indicates the disk status.

Status Description

Any character string

Indicates the disk status in detail.

Disk Type

"Data Disk",
"Hot Spare Disk",
"D. Hot Spare",
"Backup Disk",
"System Disk"

Indicates the disk assignment type.

Disk Spec.

"Fibre Channel Disk",
"Nearline FC Disk",
"SAS Disk",
"Nearline SAS Disk",
"Nearline SATA Disk",
"SSD"

Indicates the disk type.
If unknown, the value is not displayed.

Capacity

Capacity(MB)

Indicates the user area capacity of the disk. (*)

Motor Status

"Active",
"Idle",
"In the boot process",
"In the stop process",
"-"

Indicates the motor status of the disk.

When the device cannot be supported or device information cannot be collected, "-" (hyphen) is displayed.

Vender ID

Any character string

Indicates the disk manufacturer's name.

Product ID

Any character string

Indicates the product name of the disk.

Firmware Version

Any character string

Indicates the firmware version number of the disk.

Rotational Speed

Number of rotations(RPM)

Indicates the disk rotation speed.

This property is invalid, if "-" (hyphen) is displayed.

Capacity Type

Decimal number(GB) or Decimal number(TB)

Indicates the disk capacity type.

Table Element

Disk

"DE" + 0xDE number + ": " + "Disk" + Disk number

Indicates the integrated disk name.

The name is displayed in combination with the number of the DE where the disk is mounted and the slot number of the disk in the DE. (Example: DE0x00:Disk8)

The DE number is a hexadecimal number, and the disk slot number is a decimal number.

(*)NOTE: ETERNUS DX60, DX80, the physical disk capacity is displayed in the all disk. Also, ETERNUS DX60, DX80 Otherwise, the physical disk capacity is displayed in the system disk.


Table B.87 DE properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"DE" + number

Indicates a DE (Drive Enclosure) name as an icon name.

The number is a hexadecimal number.

Status

"normal",
"warning",
"error",
"fatal",
"unknown"

Indicates the DE status.

Status Description

Any character string

Indicates the DE status in detail.

Drive Enclosure Information

DE No.

Hexadecimal number

Indicates the DE ID number.


Table B.88 Battery/Capacitor properties

Tab name

Name of display item

Value

Description

Remarks

Basic Information

(Icon Name)

"Battery" + number or "Capacitor" + number

Indicates a battery/capacitor name as an icon name.

The number is a decimal number.

Status

"normal",
"warning",
"error",
"fatal",
"unknown"

Indicates the battery/capacitor status.

Status Description

Any character string

Indicates the battery/capacitor status in detail.

Battery/Capacitor Information

Battery/Capacitor No.

Decimal number

Indicates the battery/capacitor number.

The number is a serial number starting at 0.

Exchange Date

Date

Indicates the battery replacement date. An old battery must be replaced with a new one before this date. If information cannot be obtained a value will not be displayed.

In the case of Capacitor: A periodical exchange is unnecessary. The value will not be displayed.