Access path properties include HBA access path and port information (see HBA properties), CA access path and port information (see CA properties), and error information.
The error column outlines the causes of conflicts determined as having occurred on the side of this software, for access path conflicts that may occur. The following table shows the information displayed:
Number | Displayed information | Description |
|---|---|---|
0 | Nondisplay | No error |
1 | HBA Storage Affinity that is out of support on this software product is configured. Please inspect Host's configuration. | Storage affinity of the server node that is not supported by this software is configured. Check the configuration definition of the server node. |
2 | Switch Zoning (a pair of WWPNs, HBA and Storage (or Bridge) FC Port) does not exist. | Switch zoning has not been set for an access path. |
3 | Configured Storage FC Port's Host Affinity is incorrect. Please inspect Storage FC Port's Host Affinity. | Host affinity of the configured storage is incorrect. Check the host affinity setting of the storage device. |
4 | There is no connection of HBA and Switch. Please inspect HBA, FC cable, and Switch. | The host bus adapter (HBA) is not connected to the Fibre Channel switch. Check the host bus adapter (HBA), FC cable, and Fibre Channel switch. |
5 | There is no connection of Storage (or Bridge) FC Port and Switch. | The storage (bridge) FC port is not connected to the Fibre Channel switch. Check the storage (bridge) FC port, FC cable, and Fibre Channel switch. |
6 | Switches (connected with HBA, and connected with Storage (or Bridge) | The following are not cascaded: Fibre Channel switch connected to the host adapter and Fibre Channel switch whose FC port is connected to storage (bridge). |
7 | Storage (or Bridge) FC Port is degraded or error status. | The status of the storage (bridge) FC port is abnormal. |
8 | Host Agent reports Access Path Status is degraded. | Agent on a server node reports that operation of an access path is degraded. |
9 | A connection of HBA and Switch exists. But, Switch Zoning (a pair of WWPNs, HBA and Storage (or Bridge) Fc Port) is set in another Switch (IP Address of Key Domain ="+'IP address list'+"). | The connection between the host bus adapter (HBA) and Fibre Channel switch was established, but the zoning set for an access path of the Fibre Channel switch is also set for another Fibre Channel switch (IP Address of Key Domain list). |
10 | Storage (or Bridge) FC Port's observe status is not normal. | The registration status of the storage (bridge) FC port is abnormal. |
11 | There is no connection of FC Port and Switch. Please inspect FC Port, FC cable, and Switch. | The FC port is not connected to the Fibre Channel switch. Check the FC port, FC cable, and Fibre Channel switch. |
12 | Switches (connected with FC Port) are not cascaded. | The Fibre Channel switches whose FC ports are connected are not cascaded. |
