The IP address of the real device must be specified as information required to associate the device unit created virtually with the real device. The device matching operation explained later searches for the real device that matches the IP address entered here, and maps the device unit to the detected real device.
To open the Input IP address window, select a device unit, and select [Design] - [Input IP Address] from the menu bar or select [Input IP address] from the pop-up menu. The Input IP address window is shown below.
Point
Make sure that the IP address to be entered matches the information set to the real device.
Enter an IP address as follows:
Select a virtual device unit displayed on the design window.
Select [Input IP address] from the menu.
Enter an IP address.
Click <OK> button.
