C.1.2 Configuration script

The following configuration script for the Unified Installer is provided on the CD-ROM "ETERNUS SF Storage Cruiser 14.0 Manager/Agent (Solaris, HP-UX)".

No.	File	Description
1	.FJSVclis/Config1/I30FJSVssage.sh	Configuration script. When this script is executed, the agent start IP address will be set and the agent will start.
2	.FJSVclis/Config1/config/FJSVssage.m	Configuration script template.

There are the following environmental conditions.

The assumption is that the configuration scripts are executed from Unified Installer.
The assumption is that the configuration scripts are executed in single user mode.
To execute the configuration script, ESC Agent must be installed. In case of using unified installer, please select ETERNUS SF Storage Cruiser to install ESC Agent program.
The admin LAN IP address must be active, and hostname is available.

The configuration file usage is described below.

Copy the I30FJSVssagt.sh script and the FJSVssagt.m file.
Copy FJSVssagt.m file under the "config" directory as same as the CD-ROM construction.
- copy_destination_directory/I30FJSVssage.sh
- copy_destination_directory/config/FJSVssage.m
Edit the FJSVssagt.m file.
Customize (edit) the copied scripts on the installation server for the environments of all server nodes to configure. The details that must be customized are put between the header and the footer as below.
```
Header: #################### EDIT FROM HERE ####################

Footer: #################### STOP EDITING HERE ###################
```
Modify the following "10.10.10.10" to the real agent admin LAN IP address.
Please refer to "6.1.4.2 Agent admin LAN IP address configuration" for the detail information of set agent admin LAN IP address.
```
AgentIPAddress=10.10.10.10
```
The following command is executed by the configuration script.
```
/opt/FJSVssage/bin/setagtip -i xx.xx.xx.xx
```
The "xx.xx.xx.xx" is the real agent admin IP address specified in the FJSVssagt.m file. Refer to "6.1.4.2 Agent admin LAN IP address configuration" for IP address setting. For setagtip command, refer to "12.5.1.2 Agent Information change command (setagtip)" in the ETERNUS SF Storage Cruiser User's Guide.

Information

When the configuration script terminates abnormally:

The error message is output. Please modify FJSVssagt.m file and re-try the configuration script.