The device configuration cannot be changed when both Storage Volume Configuration Navigator and ETERNUSmgr/GRmgr uses at the same time. Before the device configuration data is read to Storage Volume Configuration Navigator and the designed configuration is completed to reflect to the real device, do not change the device configuration by using ETERNUSmgr/GRmgr. When the device configuration is changed, read the configuration data of the real device to Storage Volume Configuration Navigator and design again.
The configuration supported by Storage Volume Configuration Navigator is as follows. In the table, "A" indicates "Available" and "N/A" indicates "Not Available".
Storage device | Configuration | Configuration reading | Configuration design | Configuration setting | |
|---|---|---|---|---|---|
ETERNUS8000 | RAID level | RAID0 | A | N/A | N/A |
RAID1+0 | A | A (*1) | A | ||
RAID1 | A | A (*1) | A | ||
RAID5 | A | A (*1) | A | ||
RAID6 | A | A (*1) | A | ||
Hot spare | A | A | A | ||
Volume type | Open volume | A | A | A | |
Mainframe volume | A | N/A | N/A | ||
MVV | A | N/A | N/A | ||
Snap Data Volume | A | N/A | N/A | ||
SDPV | A | N/A | N/A | ||
MVV Concatenation | A | N/A | N/A | ||
LUN Concatenation | A | N/A | N/A | ||
Affinity type | AffinityGroup | A | A | A | |
Concatenated AffinityGroup | A | N/A (*2) | N/A | ||
LUN Mapping | A | N/A (*2) | N/A | ||
ETERNUS4000 | RAID level | RAID0 | A | N/A | N/A |
RAID1+0 | A | A (*1) | A | ||
RAID1 | A | A (*1) | A | ||
RAID5 | A | A (*1) | A | ||
RAID6 | A | A (*1) | A | ||
Hot spare | A | A | A | ||
Volume type | Open volume | A | A | A | |
Snap Data Volume | A | N/A | N/A | ||
SDPV | A | N/A | N/A | ||
LUN Concatenation | A | N/A | N/A | ||
Affinity type | AffinityGroup | A | A | A | |
Concatenated AffinityGroup | A | N/A (*2) | N/A | ||
LUN Mapping | A | N/A (*2) | N/A | ||
ETERNUS4000 models 80 and 100 | RAID level | RAID0 | A | N/A | N/A |
RAID1+0 | A | A (*1) | A | ||
RAID1 | A | A (*1) | A | ||
RAID5 | A | A (*1) | A | ||
Hot spare | A | A | A | ||
Volume type | Open volume | A | A | A | |
Affinity type | AffinityGroup | A | N/A | N/A | |
LUN Mapping | A | N/A | N/A | ||
ETERNUS6000 | RAID level | RAID0 | A | N/A | N/A |
RAID1+0 | A | A (*1) | A | ||
RAID1 | A | A (*1) | A | ||
RAID5 | A | A (*1) | A | ||
Hot spare | A | A | A | ||
Volume type | Open volume | A | A | A | |
Mainframe volume | A | N/A | N/A | ||
MVV | A | N/A | N/A | ||
MVV Concatenation | A | N/A | N/A | ||
RAID Consolidation | A | N/A | N/A | ||
Affinity type | AffinityGroup | A | N/A | N/A | |
LUN Mapping | A | N/A | N/A | ||
ETERNUS3000 | RAID level | RAID0 | A | N/A | N/A |
RAID1+0 | A | A (*1) | A | ||
RAID1 | A | A (*1) | A | ||
RAID5 | A | A (*1) | A | ||
Hot spare | A | A | A | ||
Volume type | Open volume | A | A | A | |
Affinity type | AffinityGroup | A | N/A | N/A | |
LUN Mapping | A | N/A | N/A | ||
ETERNUS2000 | RAID level | RAID0 | A | N/A | N/A |
RAID1+0 | A | A (*1) | A | ||
RAID1 | A | A (*1) | A | ||
RAID5 | A | A (*1) | A | ||
RAID6 | A | A (*1) | A | ||
Hot spare | A | A | A | ||
Volume type | Open volume | A | A | A | |
Snap Data Volume | A | N/A | N/A | ||
SDPV | A | N/A | N/A | ||
LUN Concatenation | A | N/A | N/A | ||
Affinity type | AffinityGroup | A | A | A | |
Concatenated AffinityGroup | A | N/A (*2) | N/A | ||
LUN Mapping | A | N/A (*2) | N/A | ||
*1: Editing operations cannot be performed if unsupported logical volumes (logical volumes other than Snap Data Volumes and SDPV) are associated with the RAID group.
*2: Editing operations cannot be performed for associated mappings either.
