This section describes the menus that can be used in the Side view. To display multiple commands on a popup menu, right-click a device and select an item on the popup menu. Any of the commands can be selected for execution. The commands on the menu differ slightly depending on the device selected.
File
Main view(O) or [Ctrl]+[O]
Delete
If an HBA or CA is selected for a device, it is deleted. However, HBAs and CAs of some devices (e.g., ETERNUS8000 series, ETERNUS6000 series, ETERNUS4000 series, ETERNUS3000 series, ETERNUS2000 series or GR series devices, and server nodes with Agent installed) cannot be deleted because this software can fully detect and recognize these HBAs and CAs.
If a device icon is selected, the device is deleted from management of this software. For details, see "Chapter 6 Operation".
Correlation Window
Performance Management Window
Property
Logout
Device
Call management software
Operation(C)
Access Path [only in the Server node view, Storage view, and Bridge view]
For information on how to use this function, see "Chapter 6 Operation".
[Inherit] Select this to inherit an access path.
[Connect] Select this to connect an access path. (This function is valid only when an HBA or CA is selected.)
[Delete] Select this to delete an access path. (This function is valid only when an access path is selected.)
View Device
The Side view displays only the devices currently related to the selected device. However, this function can display devices not related to the selected device. The resulting view is used to add access paths to other devices. (This function is valid only when no device icon is selected.)
[Add(N)] The Add View Device dialog appears, enabling selection of devices to be added to those displayed in this view. From "Available Devices" select the device to be displayed, and move it to "Devices to Show" by clicking the <>>Add> button. Clicking the <OK> button displays the view with the icon of the device registered in "Devices to Show".
[Clear] The Remove View Device dialog appears, enabling deletion of an icon from display in this view. (However, a device whose icon is deleted with this function is not deleted from this software.) From "Available Devices" select the device whose icon is to be deleted, and move it to "Devices to Hide" by clicking the <<<Delete> button. The icon of the selected device is deleted from the view when the <OK> button is clicked.
Popup menu
Change Detail View
[ON] Selecting this enlarges device icons for a more detailed display.
[OFF] Selecting this makes device icons the same size as those in the Map view of the Domain view. However, this function cannot be used for a device that is the center of a view.
Blink Beacon
[Start] This LED blinking function is provided for the following devices so that appropriate physical device locations are more easily determined: The blinking time is three minutes.
[Stop] Select this to stop the blinking.
Use of this method for recognizing devices and support of the function are explained below.
Recognized devices | Supported function |
|---|---|
Fibre Channel switch | LEDs of all the ports blink in turn. |
Fibre Channel hub (Gadzoox) | The power indication LED blinks. |
HBA (GP7B8FC1A, GP7B8FC1-G and GP7B8FC1) | The two LEDs (LINK and CHK) of the host bus adapter (HBA) blink at the same time. |
HBA (PW008FC2A, PW008FC2-G, PW008FC3 and SE0X7F11F) | The LINK LED of the HBA blinks. |
HBA (SE0X7F12F) | The selected host bus adapter (HBA) port LINK LED blinks. |
