Event log display example | Explanation | Measure |
|---|---|---|
Create Zone SNM_000B(WWPN=200000E06941432A, WWPN=220000000EBA0147) | Zone SNM_000B was created with WWPN=200000E06941432A and WWPN=220000000EBA0147. | |
Add Zone SNM_000B(WWPN=200000E06941432A, WWPN=220000000EBA0147) to Zoning Configuration SNM_BCSI | Zone SNM_000B was added to the zoning configuration SNM_BCSI, and the zone was activated. | |
Create Dummy Zone SNM_000B(WWPN=000B00000E000000, WWPN=000C00000E000000) | Dummy zone SNM_000B was created with WWPN=200000E06941432A and WWPN=220000000EBA0147. | |
Add Dummy Zone SNM_000B(WWPN=000B00000E000000, WWPN=000C00000E000000) to Zoning Configuration SNM_BCSI | Dummy zone SNM_000B was added to the zoning configuration SNM_BCSI, and the dummy zone was activated. | |
Remove Zone SNM_0007(WWPN=200000E06941456F, WWPN=222800000EA60011) from Zoning Configuration SNM_BCSI | Zone SNM_0007 was deleted from the zoning configuration SNM_BCSI, and the zone was deactivated. | |
Remove Zone SNM_0007 from Zoning Configuration SNM_BCSI | Zone SNM_0007 was deleted from the zoning setting SNM_BCSI, and the zone was deactivated. | |
Delete Zone SNM_0007(WWPN=200000E06941456F, WWPN=222800000EA60011) | Zone SNM_0007 that had been created with WWPN=200000E06941456F and WWPN=222800000EA60011 was deleted. | |
Delete Zone SNM_0007 | Zone SNM_0007 was deleted. | |
Create Zoning Configuration SNMP_BCSI | The zoning configuration SNMP_BCSI was created and activated. | |
Delete Zoning Configuration SNMP_BCSI | Zoning configuration SNMP_BCSI was deleted. | |
Unable to add zone(WWPN=200000E06941456F, WWPN=222800000EA60011) | A zone between WWPN = 200000E06941456F and WWPN = 222800000EA60011 could not be created. | Use the management software of the Fibre Channel switch or the telnet command to create the zone. |
Unable to delete zone(WWPN=200000E06941456F, WWPN=222800000EA60011) | The zone created between WWPN = 200000E06941456F and WWPN = 222800000EA60011 could not be deleted. | Use the management software of the Fibre Channel switch or the telnet command to delete the zone. |
Unable to delete zone(SNM_0007) | The zone SNM_0007 could not be deleted. | Use the management software of the Fibre Channel switch or the telnet command to delete the zone. |
