Point
The device name is not displayed in the event that there is "*" in the leftmost column of the following table.
Please sort by date and refer.
Event log display example | Explanation | Measure | |
|---|---|---|---|
Add + device-model-name | A device has been added. | ||
Delete + device-model-name/parts-name | A device has been deleted. | ||
Set SNMP Trap transmission address 12.34.56.78 | The trap transmission address of the device was set to 12.34.56.78. | ||
Delete SNMP Trap transmission address 12.34.56.78 | The trap transmission address 12.34.56.78 was deleted from the device. | ||
Change SNMP Trap transmission address | The trap transmission address of the device has been changed. | ||
* | Connect Access Path | The access path has been connected. | |
* | Delete Access Path | The access path has been deleted. | |
* | Re-set Access Path for + FC port name | The access path has been inherited. | |
Delete Switch Zone | The zoning information has been deleted. | ||
* | Failed | An error was found during the user operation. | Respond in accordance with the contents of the response dialog message and the message ID issued by the Client during operation. |
* | Same WWPN already exists.(WWPN=222800000EA60011) | WWPN (222800000EA60011) is duplicated. | Check the setting if the FC device allows change of the WWPN according to user settings. |
Invalid WWPN is detected in device model name (WWPN = WWPN information) | An incorrect WWPN was detected. | Check the setting if the FC device allows change of the WWPN according to user settings. | |
SNMP Trap was received. But the source IP address(12.34.56.78) of SNMP Trap is duplicately used by some devices in DB of Manager. | A SNMP trap was received, but the source IP address of the SNMP trap is used by multiple management target devices. | Make sure that the IP address and other information entered for incorporating the device manually is correct. | |
Unsupported Firmware Version v12.34.56 | A device with firmware v12.34.56, which is not supported by Storage Cruiser, was detected. | Firmware not supported Storage Cruiser is used for the target device. This message is displayed at the time of an operation such as "Refresh". |
