PRIMECLUSTER Global File Services Configuration and Administration Guide 4.1 (Solaris(TM) 10 Operating System) |
Contents
Index
![]() ![]() |
Appendix A List of Messages | > A.5 The GFS Shared File System Specific Management Commands' Messages |
The initialization processing of communication failed due to insufficient memory or swap space.
Check the system environment whether memory or swap space insufficiency has not occurred.
The file system monitoring mechanism is not operating.
Check whether the sfcfrmd daemon process exists using the ps(1) command.
When it does not exist, activate the file system monitoring mechanism using the sfcfrmstart(1M) command.
Illegal data exists in the file system configuration information for the file system whose fsid is FSID.
Restore the management partition using its backup previously saved.
Opening /etc/mnttab failed.
Restore /etc/mnttab, and re-execute the command.
Illegal data exists in the file system configuration information for the file system whose fsid is FSID.
Correct the file system configuration according to "9.7 Restoring of the management partition information".
Illegal data exists in the file system configuration information for the file system whose fsid is FSID.
Recover the file system configuration by referring to "9.7 Restoring of the management partition information".
The specified fsid value lies outside the valid range.
Specify a correct file system ID then execute the command again.
The file system monitoring mechanism is not operating.
Check whether the file system monitoring mechanism is running.
special is not the GFS Shared File System's representative partition.
Specify the representative partition and re-execute the command.
A GFS Shared File System identified by the specified fsid does not exist.
Check specified FSID is correct.
The command cannot be executed in the non-global zone.
For Solaris 10 OS, GFS is allowed to be operated in the global zone only.
Collection of the zone setup information failed.
Check the system then wait until the other process is done, or expand the swap area or memory. Execute the command again.
Contents
Index
![]() ![]() |