| PRIMECLUSTER Global File Services Configuration and Administration Guide 4.1 (Solaris(TM) 10 Operating System) |
|
Contents
Index
|
| Appendix A List of Messages | > A.5 The GFS Shared File System Specific Management Commands' Messages |
Failed to allocate memory. Processing cannot be continued.
Wait until other processes are finished, or increase a swap area, then re-execute the command.
Failed to get major number of drivename. Processing cannot be continued.
Check the system environment of device driver.
Failed to open /etc/mnttab or /etc/vfstab file because of errmsg. Processing cannot be continued.
Check the system environment file.
Failed to get the file system configuration information in the management partition.
Restore the file system configuration information. For detail, see "Chapter5 Management Partition".
User specified a invalid device number.
Correct device number and re-execute this command.
Failed work with unknown error.
Contact local Customer Support.
The file system monitoring mechanism is not operating.
Make sure that the file system monitoring mechanism is running.
A read error occurred with the management partition.
Collect a file output with fjsnap for troubleshooting information then contact your customer support engineers.
The obtained host ID is illegal.
Collect a file output with fjsnap for troubleshooting information then contact your customer support engineers.
The command cannot be executed in the non-global zone.
For Solaris 10 OS, GFS is allowed to be operated in the global zone only.
Collection of the zone setup information failed.
Check the system then wait until the other process is done, or expand the swap area or memory. Execute the command again.
Failed to open special or mntpoint because of errmsg. Other file systems are processed continuously.
Check the arguments of command or the system environment file.
If a GDS logical volume is being used and is ACTIVE, the volume information will be displayed. Bring the volume into ACTIVE then execute the command again.
If you are operating the GFS Management View, bring the volume into ACTIVE then execute the command again.
Configuration data of the specified partition is invalid. Other file systems are processed continuously.
Check the specified partition to determine if it is an sfcfs file system.
Failed to obtain the device data of partition special. Other file systems are processed continuously.
Check the system environment to determine if partition special is correct.
The specified partition must be a block special file but it is a character special file. Other file systems are processed continuously.
Specify a block special file as a partition.
The specified file must be a block special file or a directory. Other file systems are processed continuously.
Specify a block special file or mount point directory.
The I/O operation to the special file special failed
Check if the special file is correct.
Failed to read normal super block data. Therefore, redundant data is read out.
Delete the target file system where it is unnecessary. For details, see "11.8 Deleting". When it is a necessary file system, restore it running a full scan with fsck_sfcfs(1M). For details, see "C.3.1 Action for I/O errors".
Reading the redundant volume information on special failed.
Delete the target file system where it is unnecessary. For details, see "11.8 Deleting". When it is a necessary file system, restore it running a full scan with fsck_sfcfs(1M). For details, see "C.3.1 Action for I/O errors".
|
Contents
Index
|