Interstage Shunsaku Data Manager Messages - Microsoft(R) Windows(R) 2000/ Microsoft(R) Windows Server(TM) 2003 -

Appendix A List of Messages Output to the Event Log

This chapter explains about the messages output to the event log

Decide the messages to monitor for each job.

The following table shows the classification of messages that are output to the event log and the process that those messages will be output. The massages will be output to the event log of the servers that each process is located.

Messages output to the event log

Classification	Process type (*1)
shn01000 to shn01999	director
shn02000 to shn02999	director
shn03000 to shn03999	searcher
shn04000 to shn04999	searcher
shn06000 to shn06999	conductor
shn07000 to shn07999	sorter
shn10000 to shn10999	Common
shn12000 to shn12999	director
shn16000 to shn16999	conductor
shn17000 to shn17999	conductor
shn30000 to shn30099	Common
shn30100 to shn30199	conductor
shn30200 to shn30299	conductor
shn30300 to shn30399	director
shn30400 to shn30499	searcher
shn30500 to shn30599	conductor

*1) 'Common' means that the messages will be output either to conductor, director, searcher, or sorter.

The process is reporting an error when the last character of the message code is "e" or "u". The process with this message code is recommended to be monitored.

For the event viewer, the types of event are as follows:

The last character of the message code

Type of event viewer

e, u

Error

w

Warning

i

Information

The last character of the message code	Type of event viewer
e, u	Error
w	Warning
i	Information

Classification	Message code	Description
shn01000 to shn01999
	shn01001i	The update function has been forcibly stopped.
	shn01002w	The update function log file could not be opened.
	shn01005i	The update function log file has been switched.
	shn01100i	The initialization process has started.
	shn01101i	The director data file already exists in the directory which specified by the "DataFileFolder" parameter in the director environment file.
	shn01102i	The director data file already exists in the directory which specified by the "DataFileFolder" parameter in the director environment file.
	shn01103i	A consistency check is being performed on the director data stored in the directory which specified by the "DataFileFolder" parameter in the director environment file.
	shn01104i	The consistency of the director data stored in the directory which specified by the "DataFileFolder" parameter in the director environment file is maintained.
	shn01105i	The director data file exists in the directory which specified by the "DataFileFolder" parameter in the director environment file.
	shn01106i	The director is waiting for connections to the searchers to be made.
	shn01107i	Connections to the searcher have been made.
	shn01108i	The number of searcher connections has reached the maximum number defined in the director environment file.
	shn01109i	The initialization process has completed.
	shn01110i	Connections to the searcher have been made.
	shn01200i	The termination process has started.
	shn01201i	A stop command has been sent to the searchers.
	shn01202i	The termination process has completed.
	shn01300i	The deletion of director data process has started.
	shn01301i	A batch delete command has been sent to the searchers.
	shn01302i	The deletion of director data process has completed.
	shn01400i	The update process has started.
	shn01401i	An update cancellation request from a command has been received.
	shn01402i	Update data is being imported.
	shn01403i	Update data is being written to the director data file.
	shn01404i	Information about numbers of receiving updates.
	shn01405i	Update data is being transmitted to the searchers.
	shn01406i	An update cancellation request has been sent to the searchers.
	shn01407i	Update data is being reflected.
	shn01408i	A request to execute update processing has been sent to the searchers.
	shn01409i	A request to cancel update processing has been sent to the searchers.
	shn01410i	The update process has completed.
	shn01411i	The update cancellation process has completed.
	shn01500i	The defined number of searchers is being changed.
	shn01501i	The defined number of searchers has been changed.
	shn01600i	The reallocation process has started.
	shn01601i	The reallocation process has completed.
	shn01700i	The condense process has started.
	shn01701i	The condense process has completed.
	shn01900i	The degradation process has started.
	shn01901i	The searcher is being switched to the alternative searcher.
	shn01902i	The degradation process has completed.
	shn01903i	Connections to the searcher have been broken.
	shn01904i	Switching to the alternative searcher.
	shn01906w	The required searchers to operate are insufficient.
shn02000 to shn02999
	shn02000e	An error has occurred with communications processing.
	shn02001e	There is not enough memory available.
	shn02002u	Processing cannot continue because of an error with an OS system call.
	shn02003u	A system error has occurred.
	shn02004u	The director data file does not exist in the directory which specified by the "DataFileFolder" parameter in the director environment file.
	shn02005u	The director data file does not exist in the directory which specified by the "DataFileFolder" parameter in the director environment file.
	shn02006u	The director data file could not be opened.
	shn02007u	The director data file could not be opened.
	shn02008u	Could not write to the director data file.
	shn02009u	Could not write to the director data file.
	shn02010u	The director data file is corrupt.
	shn02011u	Processing failed due to an OS system call error.
	shn02012u	The director has terminated abnormally because it received a signal.
	shn02013u	The core file has been collected.
	shn02014u	The update function has terminated abnormally.
	shn02100u	There is an error with the startup parameters.
	shn02101u	The director could not be started because the director data file does not exist.
	shn02102u	The director could not be started because consistency of the director data stored in the directory which specified by the "DataFileFolder" parameter in the director environment file could not be verified.
	shn02103u	Could not open the director environment file.
	shn02104u	There is an error with definitions in the director environment file.
	shn02105u	Shared memory is being used by another system.
	shn02106u	The director cannot start for one of the following reasons: - The director is already active. - The director is currently being started or stopped.
	shn02107u	The specified shared memory is being used by another Shunsaku system.
	shn02108u	The area in the TCP segment that indicates the port is a 16-bit number. Specify a port number between 0 and 65535.
	shn02109u	Resolving host name of the alternative searcher has been failed.
	shn02400u	There is an error with the end-of-file marker in the extraction data file.
	shn02401u	There was an error in judging whether the extraction data file is big- or little-endian.
	shn02402u	There is an error with the RowID length for the extraction data file.
	shn02403u	There is an error with the number of data items in the extraction data file.
	shn02404u	There is an error with the command type for the extraction data file.
	shn02405u	The specified data to be deleted does not exist.
	shn02406u	The specified data to be updated does not exist.
	shn02407u	The specified data to be inserted already exists.
	shn02408u	A data inconsistency between the director and a searcher has occurred.
	shn02409u	There is a not well-formed XML document (which may be 0 byte data).
	shn02410u	There is an XML document that is not well-formed, or an error is in a character code.
	shn02412u	The document number judged to be the error of the "shn02410u" displayed before this message is displayed.
	shn02413u	An overflow has occurred.
	shn02414u	Processing cannot continue because of the file system for the working directory is full.
	shn02415u	There is an error in the file identification of the input file.
	shn02600u	The director data file is corrupt.
	shn02700u	The director data file is corrupt.
	shn02800e	There is a syntax error in the specified search expression.
	shn02801e	There is a syntax error in the specified return expression.
	shn02900e	An error has occurred with a searcher.
	shn02901u	Degradation processing failed because there was not enough memory.
	shn02902u	Degradation processing failed because of an OS system call error.
	shn02903w	Alternative searcher was not connected to the director.
shn03000 to shn03999
	shn03100i	The initialization process has started.
	shn03101i	A request to clear data was received from the director.
	shn03102i	The initialization process has completed.
	shn03103i	An attempt to connect to the director has been refused. The possible cause is as follows: - The maximum number of searchers that can be connected to the director has been exceeded.
	shn03104i	An attempt to connect to the socket for director searches has been completed successfully.
	shn03105i	An attempt to connect to the socket for director updates has been completed successfully.
	shn03106i	The initialization process has completed as an alternative searcher.
	shn03107i	The connection of alternative searcher and the director was completed.
	shn03200i	The termination process has started.
	shn03201i	The termination process has completed.
	shn03300i	A batch deletion request was received from the director.
	shn03301i	The batch deletion process has completed.
	shn03400i	An update request has been received.
	shn03401i	A request to cancel the update has been received.
	shn03402i	Information about numbers of receiving updates.
	shn03403i	An update execution request has been received.
	shn03404i	A request to cancel the update has been received.
	shn03405i	The update process has completed.
	shn03406i	The update cancellation process has been started.
shn04000 to shn04999
	shn04000e	An error has occurred with communications processing.
	shn04001e	There is not enough memory available.
	shn04002u	A system call has terminated abnormally.
	shn04003u	A system error has occurred.
	shn04004u	The searcher has terminated abnormally because it received a signal.
	shn04005u	The core file has been collected.
	shn04006i	An error has occurred with communications processing at MyPort.
	shn04007i	An error has occurred in the communications processing of alternative searcher request.
	shn04100u	There is an error with the startup parameters.
	shn04101u	Could not open the searcher environment file.
	shn04102u	There is an error with definitions in the searcher environment file.
	shn04103u	A communication error with the director occurred during initialization.
	shn04104u	The possible causes are as follows: - The director is not running. - There is an error with the director information defined in the searcher environment file.
	shn04105u	Shared memory is being used by another system.
	shn04106u	The searcher cannot start for one of the following reasons: - The searcher is already active. - The searcher is currently either initializing or terminating.
	shn04107u	The specified shared memory is being used by another Shunsaku system.
	shn04108u	The area in the TCP segment that indicates the port is a 16-bit number. Valid port numbers are between 0 and 65535.
	shn04400e	The specified data to be updated does not exist.
	shn04401e	The specified data to be deleted does not exist.
	shn04402e	There is a not well-formed XML document.
	shn04800e	There is a syntax error in the specified search expression.
shn06000 to shn06999
	shn06000u	A system error has occurred.
	shn06001u	A system call terminated abnormally.
	shn06002u	The conductor has terminated abnormally because it received a signal.
	shn06003u	The core file has been collected.
	shn06004w	The conductor log file for the conductor could not be opened for some reason.
	shn06005w	An error occurred while log data was being written to the conductor log file.
	shn06006w	Logs cannot be written to the conductor log file because the file system for the conductor log file is full.
	shn06007i	The conductor log file has been switched.
	shn06008u	There is not enough local memory.
	shn06009i	The initialization process for the conductor has completed.
	shn06010i	The stop process for the conductor has completed.
	shn06011e	It took longer to respond to the application than the time specified in the WaitTimer parameter in the conductor environment file.
	shn06012e	The number of concurrent connections from applications has exceeded the value specified in the MaxConnection parameter in the conductor environment file.
	shn06013e	An error occurred during communications with the application.
	shn06014e	An error occurred during communications with the director.
	shn06015e	An error occurred during communications with the sorter.
	shn06016e	It took longer to respond to the application than the time specified in the WaitTimer parameter in the conductor environment file.
shn07000 to shn07999
	shn07001i	The sorter has started initialization.
	shn07002i	The start process for the sorter has been completed.
	shn07003i	The termination process has started.
	shn07004i	The termination process has completed.
	shn07005u	There is not enough memory available.
	shn07006u	Processing cannot continue because of an error in an OS system call.
	shn07007u	A system error has occurred.
	shn07008u	There is an error with the startup parameters.
	shn07009u	Failed to open the sorter environment file.
	shn07010u	There is an error in the definitions in the sorter environment file.
	shn07012u	Shared memory is being used by other systems.
	shn07015u	The sorter cannot start for one of the following reasons: - The sorter is already active. - The sorter is currently being started or stopped.
	shn07016u	The specified shared memory is being used by another Shunsaku system.
	shn07017e	The sorter has terminated abnormally because it received a signal.
	shn07018e	The core file has been collected.
	shn07019u	An error has occurred with communications processing.
	shn07020u	There is not enough memory available.
shn10000 to shn10999
	shn10001u	The message control file does not exist.
	shn10002u	An error occurred with a system call to the message control file.
	shn10003u	A message control code was not found in the message control file.
	shn10004u	An error occurred with a system call to the message control file.
shn12000 to shn12999
	shn12003u	The director environment file for the specified director identifier does not exist.
	shn12004u	The director environment file contains a line that contains too many characters.
	shn12005u	The same execution parameter is specified more than once in the director environment file.
	shn12006u	There is an error in a value specified in a execution parameter of the director environment file.
	shn12007u	There is an error with a value specified in a execution parameter in the director environment file.
	shn12008u	A required execution parameter is missing from the director environment file.
shn16000 to shn16999
	shn16000u	The conductor environment file for the specified conductor identifier does not exist.
	shn16001u	The director environment file for the specified director identifier does not exist.
	shn16002u	An OS system call returned an error.
	shn16003u	One of the lines in the conductor environment file is too long.
	shn16004u	One of the lines in the director environment file is too long.
	shn16005u	There was not enough memory when the conductor or director environment file was being loaded.
	shn16006u	There is an error with the syntax of a execution parameter in the conductor environment file.
	shn16007u	There is an error with the syntax of a execution parameter in the director environment file.
	shn16008u	There is an error with a value specified in a execution parameter in the conductor environment file.
	shn16009u	There is an error with a value specified in a execution parameter in the director environment file.
	shn16010u	An identical execution parameter appears more than twice in the conductor environment file.
	shn16011u	An identical execution parameter appears more than twice in the director environment file.
	shn16012u	The conductor environment file contains an invalid execution parameter.
	shn16013u	The director environment file contains an invalid execution parameter.
	shn16014u	A required execution parameter is missing from the conductor environment file.
	shn16015u	A required execution parameter is missing from the director environment file.
	shn16016u	The director information appears more than once.
	shn16017i	The director has been added.
	shn16018i	The specified director has been deleted.
	shn16019i	The StartPoint parameter has been changed.
	shn16020e	At least one director must be defined.
	shn16021u	Failed to bind a socket.
	shn16023u	The Shunsaku environment has not been set up correctly.
	shn16040u	The execution parameter in the conductor environment file did not match the execution parameter in the director environment file.
shn17000 to shn17999
	shn17002u	The environment for Shunsaku has not been set up correctly.
shn30000 to shn30099
	shn30001u	Shunsaku could not be started because there are too many Shunsaku processes running on the server.
	shn30002u	A command that runs while Shunsaku is inactive cannot be executed due to one of the following reasons: - Shunsaku is active; or - Shunsaku is in the process of starting or stopping.
	shn30003u	Shunsaku is not running.
	shn30004u	There is not enough local memory.
	shn30005u	A system call has terminated abnormally.
	shn30006u	A system call has terminated abnormally.
	shn30010u	Because the file system temporarily used by the system is full, the current processing cannot continue.
	shn30019w	There is an error with one of the values specified with a execution parameter in the environment file.
	shn30020w	Cannot output logs because there is not enough local memory.
	shn30021w	Cannot output logs because the system call has terminated abnormally.
	shn30022w	Cannot open or switch the log file due to an error.
	shn30023w	An error occurred while the log file was being written.
	shn30024i	Cannot write to the log file because the file system for the log file is full.
shn30100 to shn30199
	shn30100e	The collection of connection information will be suspended because there is not enough memory.
	shn30101e	The collection of connection information will be suspended because an I/O error has occurred while connection information was being output.
	shn30102u	The conductor could not be stopped because all transactions were not complete within a certain time.
	shn30103u	The conductor environment cannot be changed dynamically using the "shunccfgedit" command because the environment uses files.
	shn30106u	The director has already been registered in a file.
	shn30107u	The directory has not been registered with the conductor.
	shn30108u	The specified domain information has been defined more than once.
	shn30109u	The specified file information has been defined more than once.
	shn30110i	The director belonging to the file has been registered successfully.
	shn30111i	The domain has been registered successfully.
	shn30112i	The file has been registered successfully.
	shn30113i	The file belonging to the domain has been registered successfully.
	shn30114u	Domain information does not exist.
	shn30115u	File information does not exist.
	shn30116u	The file has already been registered with a domain.
	shn30117u	The specified sorter information already exists.
	shn30118i	The sorter has been added.
	shn30121u	The DefaultFile parameter in the conductor environment file does not exist.
	shn30122u	An attempt to connect to the file or domain has failed.
	shn30127u	An internal message is invalid.
	shn30128u	The connection could not be closed within a certain time.
	shn30134u	There is an error in the specified director identifier in system environment file.
	shn30135u	There is an error in the specified director number in system environment file.
	shn30136i	The InsertPoint parameter has been changed.
	shn30137u	An attempt to connect to the Shunsaku has failed.
	shn30138u	Cannot set _LAST_ in the InsertPoint parameter or StartPoint parameter because a director that hasn't been allocated a director number exists.
	shn30139u	The specified director cannot be deleted because it is where data is to be inserted.
	shn30140u	The specified director cannot be deleted because it hasn't been allocated a director number.
	shn30143u	There is an error with the specified maximum number of hits.
shn30200 to shn30299
	shn30204u	There is an error in the specification of the start point or the end point of the data to be extracted.
	shn30205u	The sorter to be started has not been defined in the system environment file.
	shn30206u	An overflow has occurred.
shn30300 to shn30399
	shn30300u	There is an XML document that is not well-formed, or an error is in a character code.
	shn30301u	The port number is already being used.
	shn30302u	A system error has occurred.
	shn30303u	There is not enough local memory in searcher.
	shn30304u	"Director" information for the director to be started has not been specified in the system environment file.
	shn30305u	"Searcher" information for the director to be started has not been specified in the system environment file.
	shn30306u	An I/O error has occurred with a file in the director data folder.
	shn30307u	An I/O error has occurred with a file in the operation log folder.
	shn30309w	The recovery processing of the director data file might fail, because the operation log file is discontinuous.
	shn30310u	The director data file is broken.
	shn30311u	The operation log file is broken.
	shn30312i	Switching to the normal searcher.
	shn30313i	The switch processing was completed.
	shn30375u	The character code used in the stored XML document differs from the CharacterCode parameter defined in the system environment file.
	shn30380u	An overflow has occurred.
	shn30383u	There is an error in the direct access key definition file.
	shn30391w	The value smaller than the actual resource is specified in the execution parameter of the director environment file.
	shn30392w	The number of stored records has reached the alarm point.
	shn30393u	The addition processing has been stopped because the maximum record number will be exceeded if data is added.
	shn30395w	The size of the director data file has reached the alarm point.
	shn30396u	The size of the director data file to be used has reached the maximum.
	shn30397w	The size of the operation log file to be used has reached the alarm point.
	shn30398u	The size of the operation log file to be used has reached the maximum.
shn30400 to shn30499
	shn30404u	There is an error with one of the values specified with a execution parameter in the environment file.
	shn30406i	An error has occurred with communications processing at Port number that receives requests from the director.
	shn30407u	A communication error with the director occurred during initialization.
	shn30409w	The contents received from the director have been changed.
shn30500 to shn30599
	shn30515u	The "InsertPoint" parameter cannot be omitted because multiple directors have been defined.
	shn30541u	Processing has failed due to an system call error to the operating system.
	shn30542u	The command cannot be executed because either another command is executing or the director is still starting up.
	shn30562u	There is not enough local memory.

Contents Index