PRIMECLUSTER Global File Services Configuration and Administration Guide 4.2 (Solaris(TM) Operating Environment)

E.5.24 sfctune command

E.5.24.1 Bad super block special: ....

[Explanation]

The super block in the specified special file indicated by special could not be read.

[Action]

Contact local Customer Support.

E.5.24.2 bread: llseek: ....

E.5.24.3 FS SEEK: ....

E.5.24.4 llseek: ....

[Explanation]

llseek(2) could not be executed for the specified special file indicated by special.

[Action]

Contact local Customer Support.

E.5.24.5 sfctune: cannot acquire lock for filesystem fsid =n

[Explanation]

Cannot get the lock for file system. Other command or daemon is operating with lock.

[Action]

Please wait to complete operating the command or daemon of a GFS Shard file system in all nodes, and re-execute sfctune(1M) again.

E.5.24.6 sfctune: cannot get filesystem ID for special.

E.5.24.7 sfctune: special is not used as sfcfs filesystem.

[Explanation]

The special file name indicated by special is not GFS shared file system.

[Action]

Check the specified special file name indicated by special.

E.5.24.8 Cannot open special: ....

E.5.24.9 cannot open special

[Explanation]

The specified special file indicated by special could not be opened.

[Action]

Check the specified special file name indicated by special.

E.5.24.10 sfctune: Could not find raw device for mount_point

[Explanation]

The raw device corresponding to mount point (mount_point) specified in the /etc/mnttab or the /etc/vfstab file was not found.

[Action]

Check the specified mount point indicated by mount_point.

E.5.24.11 /etc/vfstab: open: ....

[Explanation]

The /etc/vfstab could not be opened.

[Action]

Make sure that /etc/vfstab exists. If not, restore it from a backup, or see Section 22.2.3, "Setting vfstab" and redefine it.

E.5.24.12 sfctune: ERROR: Cannot acquire lock: type(num)

[Explanation]

Cannot get the lock for file system. Other command or daemon is operating with lock.

[Action]

Please wait to complete operating the command or daemon of a GFS Shard file system in all nodes, and re-execute sfctune(1M) again.

E.5.24.13 sfctune: ERROR: File system is corrupted.

[Explanation]

The file system cannot be created because it is not shut down normally during partition addition.

[Action]

Repair the file system according to the following message using fsck_sfcfs(1M). Complete partition addition using sfcadd(1M), then re-execute sfctune(1M).

E.5.24.14 sfctune: file system configuration information not found.

[Explanation]

The file system configuration information in the management partition was not found.

[Action]

Restore the file system configuration information. For detail, see Chapter 16, "Management Partition."

E.5.24.15 FS WRITE: ....

[Explanation]

The system could not write the specified special file indicated by special.

[Action]

Contact local Customer Support.

E.5.24.16 Ioctl: ....

[Explanation]

ioctl(2) could not be executed for the specified special file indicated by special.

[Action]

Contact local Customer Support.

E.5.24.17 malloc: ....

[Explanation]

Memory could not be allocated. Memory of system is insufficient.

[Action]

Please check the state of a system, and wait for the termination of another process, or increase the swap space or real memory. After it and re-execute the command.

E.5.24.18 sfctune: malloc failed

E.5.24.19 sfctune: option: bad optimization preference (options are `space' or `time')

[Explanation]

An invalid option was specified for indicating the file system strategy optimization preference.

[Action]

Specify space or time as the optimization preference for the file system strategy.

E.5.24.20 maximum contiguous block count changes from current to new

[Explanation]

The maximum number of contiguous blocks in the file system was changed from current to new.

[Action]

No response is required.

E.5.24.21 minimum percentage of free space changes from current% to new%

[Explanation]

The minimum percentage of the unused file system area was changed from current to new.

[Action]

No response is required.

E.5.24.22 optimization preference changes from current to new

[Explanation]

The optimization preference for file system strategy was changed from current to new.

[Action]

No response is required.

E.5.24.23 read: ....

[Explanation]

The system could not read data from the specified special file indicated by special.

[Action]

Contact local Customer Support.

E.5.24.24 sfctune: sfctune: bad minimum percentage of free space

[Explanation]

The specified minimum percentage for unused area is invalid.

[Action]

Specify a positive number as the minimum percentage of unused area.

E.5.24.25 sfctune: sfctune: bad Vnode minimum percentage of free space

[Explanation]

The specified minimum percentage for unused virtual node area is invalid.

[Action]

Specify a positive number as the minimum percentage of unused virtual node area.

E.5.24.26 sfctune: sfctune: maximum contiguous block count must be >= 1

[Explanation]

The specified maximum number of contiguous blocks is invalid. The maximum number of contiguous blocks must be 1 or more.

[Action]

Specify a value of 1 or more as the maximum number of contiguous blocks.

E.5.24.27 sfctune: special: ....

[Explanation]

stat(2) failed for the specified special file indicated by special.

[Action]

Check the specified special file name indicated by special.

E.5.24.28 special: bad magic number

[Explanation]

The specified special file indicated by special is not a partition in the GFS Shared File System.

[Action]

Check the specified special file name indicated by special.

E.5.24.29 sfctune: special is mounted, can't tune

[Explanation]

The specified special file indicated by special is mounted. sfctune(1M) cannot be executed.

[Action]

Check the specified mount point. If there is no problem, unmount the specified mount point, and reexecute the command.

E.5.24.30 sfctune: special: not a block or character device

[Explanation]

The specified special file indicated by special is neither a block nor a character device.

[Action]

Check the specified special file name indicated by special.

E.5.24.31 sfctune: special not a meta partition

[Explanation]

The specified special file indicated by special is not a representative partition.

[Action]

Check the specified special file name indicated by special.

E.5.24.32 Vnode minimum percentage of free space changes from current% to new%

[Explanation]

The minimum percentage for unused virtual node area in the file system was changed from current to new.

[Action]

No response is required.