PRIMECLUSTER Global File Services Configuration and Administration Guide 4.2 (Solaris(TM) Operating Environment)

E.5.15 sfcnewfs command

E.5.15.1 sfcnewfs: ERROR: -*: unknown flag

[Explanation]

An illegal option was specified.

[Action]

Check the specified options.

E.5.15.2 sfcnewfs:ERROR:argument is too long

[Explanation]

mkfs_sfcfs(1M) could not be executed because too many parameter values were specified.

[Action]

Check the specified parameter values.

E.5.15.3 sfcnewfs: ERROR: Cannot open file: errmsg

[Explanation]

The specified file indicated by file could not be accessed for the reason indicated by errmsg.

[Action]

Check whether the specified file is correct.

E.5.15.4 sfcnewfs: ERROR: Cannot stat file: errmsg

[Explanation]

The specified file indicated by file could not be accessed for the reason indicated by errmsg.

[Action]

Check whether the specified file is correct.

E.5.15.5 sfcnewfs: ERROR: -C: cannot specified other options

[Explanation]

The -C option cannot be specified together with other options except v and N.

[Action]

Specify other options in the parameter file.

E.5.15.6 sfcnewfs: ERROR: -C: missing parameter file

[Explanation]

No argument was specified for the -C option.

[Action]

Specify a parameter file.

E.5.15.7 sfcnewfs: ERROR: -C: missing meta partition in file

[Explanation]

No representative partition was specified.

[Action]

Specify a representative partition in the parameter file.

E.5.15.8 sfcnewfs: ERROR: dataopt: bad dataopt preference

[Explanation]

The specified parameter value indicated by dataopt is illegal.

[Action]

Check the specified parameter value.

E.5.15.9 sfcnewfs: ERROR: data partition not specified

[Explanation]

No data partition was specified.

[Action]

Specify a data partition in which to place the data area.

E.5.15.10 sfcnewfs: ERROR: Line number n is bad entry in file

[Explanation]

A problem was found in line n in the file specified for the -C option.

[Action]

Check the explanation of the file specified for the -C option.

E.5.15.11 sfcnewfs: ERROR: logsz: bad update log size

[ Explanation]

The specified parameter value indicated by logsz is invalid.

[Action]

Check the specified parameter value.

E.5.15.12 sfcnewfs: ERROR: malloc failed

[Explanation]

Memory could not be allocated. Memory of system is insufficient.

[Action]

Please check the state of a system, and wait for the termination of another process, or increase the swap space or real memory. After it and re-execute the command.

E.5.15.13 sfcnewfs: ERROR: missing bytes per inode of string

[Explanation]

There is no argument with nbpi option.

[Action]

Specify the number of bytes per i-node according to the specification method indicated by string.

E.5.15.14 sfcnewfs: ERROR: missing dataopt preference of string

[Explanation]

There is no argument with dataopt option.

[Action]

Specify y or n according to the specification method indicated by string.

E.5.15.15 sfcnewfs: ERROR: missing data partition (raw-special-device) of string

[Explanation]

No data partition was specified as an argument.

[Action]

Specify a data partition according to the specification method indicated by string.

E.5.15.16 sfcnewfs: ERROR: missing hostname of string

[Explanation]

No host name was specified as an argument.

[Action]

Specify a host name group for sharing the file system or locating the meta-data server according to the specification method indicated by string.

E.5.15.17 sfcnewfs: ERROR: missing max data size of string

[Explanation]

There is no argument with maxdsz option.

[Action]

Specify the maximum size of the data area according to the specification method indicated by string.

E.5.15.18 sfcnewfs: ERROR: missing meta data size of string

[Explanation]

There is no argument with metasz option.

[Action]

Specify the meta-data area size according to the specification method indicated by string.

E.5.15.19 sfcnewfs: ERROR: missing meta partition of string

[Explanation]

No representative partition was specified as an argument.

[Action]

Specify a representative partition according to the specification method indicated by string.

E.5.15.20 sfcnewfs: ERROR: missing minfree space % of string

[Explanation]

There is no argument with mimfree option.

[Action]

Specify the minimum percentage (0 < n < 99) of the unused file system area according to the specification method indicated by string.

E.5.15.21 sfcnewfs: ERROR: missing mminfree space % of string

[Explanation]

There is no argument with mminfree option.

[Action]

Specify the minimum percentage (0 < n < 99) of the unused V-data area according to the specification method indicated by string.

E.5.15.22 sfcnewfs: ERROR: missing number of blocks per one extents of string

[Explanation]

There is no argument with nblkpext option.

[Action]

Specify the average number of blocks managed in one extent according to the specification method indicated by string.

E.5.15.23 sfcnewfs: ERROR: missing number of maxnode of string

[Explanation]

There is no argument with maxnode option.

[Action]

Specify the maximum number of nodes sharing a file system according to the specification method indicated by string.

E.5.15.24 sfcnewfs: ERROR: missing number of maxvol of string

[Explanation]

There is no argument with maxvol option.

[Action]

Specify the maximum number of partitions according to the specification method indicated by string.

E.5.15.25 sfcnewfs: ERROR: missing parameter of -S all|num

[Explanation]

The MDS operational information is specified incorrectly.

[Action]

Specify the MDS operational information correctly.

E.5.15.26 sfcnewfs: ERROR: missing optimization preference of string

[Explanation]

There is no argument with opt option.

[Action]

Specify an optimization parameter according to the specification method indicated by string.

E.5.15.27 sfcnewfs: ERROR: missing update log size of string

[Explanation]

There is no argument with logsz option.

[Action]

Specify the update log area size according to the specification method indicated by string.

E.5.15.28 sfcnewfs: ERROR: missing update log partition (raw-special-device) of string

[Explanation]

There is no argument with log option.

[Action]

Specify an update log partition according to the specification method indicated by string.

E.5.15.29 sfcnewfs: ERROR: number of mdsnode over num

[Explanation]

The MDS operational information exceeded the limit of num that can be specified.

[Action]

Limit the MDS operational information to num.

E.5.15.30 sfcnewfs: ERROR: maxdsz: bad max data size

[Explanation]

The specified parameter value indicated by maxdsz is illegal.

[Action]

Check the specified parameter value.

E.5.15.31 sfcnewfs: ERROR: maxnode: bad number of maxnode

[Explanation]

The specified parameter value indicated by maxnode is illegal.

[Action]

Check the specified parameter value.

E.5.15.32 sfcnewfs: ERROR: maxvol: bad number of maxvol

[Explanation]

The specified parameter value indicated by maxvol is illegal.

[Action]

Check the specified parameter value.

E.5.15.33 sfcnewfs: ERROR: metasz: bad meta data size

[Explanation]

The specified parameter value indicated by metasz is illegal.

[Action]

Check the specified parameter value.

E.5.15.34 sfcnewfs: ERROR: minfree: bad minfree space %

[Explanation]

The specified parameter value indicated by minfree is illegal.

[Action]

Check the specified parameter value.

E.5.15.35 sfcnewfs: ERROR: mminfree: bad mminfree space %

[Explanation]

The specified parameter value indicated by mminfree is illegal.

[Action]

Check the specified parameter value.

E.5.15.36 sfcnewfs: ERROR: nblkpext: bad number of blocks per one extents

[Explanation]

The specified parameter value indicated by nblkpext is illegal.

[Action]

Check the specified parameter value.

E.5.15.37 sfcnewfs: ERROR: nbpi: bad bytes per inode

[Explanation]

The specified parameter value indicated by nbpi is illegal.

[Action]

Check the specified parameter value.

E.5.15.38 sfcnewfs: ERROR: number: number of partition is maxvol over

[Explanation]

The number of specified partitions (number) exceeded the upper limit.

[Action]

The maximum number of partitions configuring a file system can be specified using maxvol option.

Check whether the specified number of partitions is correct.

E.5.15.39 sfcnewfs: ERROR: opt: bad optimization preference

[Explanation]

The specified parameter value indicated by opt is illegal.

[Action]

Check the specified parameter value.

E.5.15.40 sfcnewfs: ERROR: same hostname are specified

[Explanation]

Only one meta-data server can be deployed for one host name.

[Action]

Change the specification to deploy only one meta-data server or to deploy each meta-data server on a different host.

E.5.15.41 sfcnewfs: ERROR: special is not a raw disk device

[Explanation]

The specified file indicated by special is not a character special file.

[Action]

Specify a character special file.