PRIMECLUSTER Global File Services Configuration and Administration Guide 4.2 (Solaris(TM) Operating Environment)

E.4.4 mount_sfcfs command

E.4.4.1 ERROR: mount: 0001: Permission denied

[Explanation]

Execution was attempted with other than super user permission.

[Action]

Retry execution with super user permission.

E.4.4.2 ERROR: mount: 0002: Cannot open vfstab file

[Explanation]

/etc/vfstab could not be opened.

[Action]

Make sure that /etc/vfstab exists. If not, restore it from a backup, or see Section 22.2.3, "Setting vfstab" and redefine it.

E.4.4.3 ERROR: mount: 0003: Both special and mount_point need to be specified in vfstab

[Explanation]

Special file special, or mount point mount_point is not described in /etc/vfstab.

[Action]

Check the status of /etc/vfstab.

E.4.4.4 ERROR: mount: 0004: {special | mount_point}: Cannot connect to cluster foundation

[Explanation]

Connection to the cluster control facility failed.

[Action]

Confirm that the cluster control facility has started.

E.4.4.5 ERROR: mount: 0005: {special | mount_point}: Cannot allocate memory

[Explanation]

Memory acquisition failed. Memory of system is insufficient.

[Action]

Please check the state of a system, and wait for the termination of another process, or increase the swap space or real memory. After it and re-execute the command.

E.4.4.6 ERROR: mount: 0007: {special | mount_point}: Cannot get lock: config

[Explanation]

The lock to change the file system (mount_point) configuration information cannot be obtained. In an optional process within the cluster configuration, the lock to change the file system configuration information is being obtained.

[Action]

Execution must be performed after waiting for the lock to change the domain configuration information to be released.

E.4.4.7 ERROR: mount: 0008: {special | mount_point}: Read error on management partition to get fsid

[Explanation]

Reading of the management partition to obtain the file system (mount_point) id has failed.

[Action]

After confirming the state of sfcfrmd daemon by using the like of the ps(1) command, contact local Customer Support.

E.4.4.8 ERROR: mount: 0009: {special | mount_point}: Cannot get lock: fsid

[Explanation]

Exclusive lock for fsid within the domain cannot be acquired. The exclusive lock for fsid has been acquired by another process running on a node in the cluster.

[Action]

Wait for the exclusive lock for fsid to be released, and then retry.

E.4.4.9 ERROR: mount: 0010: {special | mount_point}: Read error on management partition to get node information

[Explanation]

Reading of the management partition to obtain the cluster configuration node information has failed.

[Action]

After confirming the state of sfcfrmd daemon by using the likes of the ps(1) command, contact local Customer Support.

E.4.4.10 ERROR: mount: 0011: {special | mount_point}: Node information for this node was not found

[Explanation]

The node is not registered as a member to share GFS Shared File System.

[Action]

Show information of the node by sfcinfo(1M) command with -an option. If the host name of the node does not appear, add the host name by sfcnode(1M) command. If the host name of the node is wrong, change the host name by sfcadd(1M) command.

E.4.4.11 ERROR: mount: 0012: Cannot mount special

[Explanation]

Mount processing for special failed.

[Action]

Check the status of the specified special file and mount point, and then retry mount processing.

E.4.4.12 ERROR: mount: 0013: {special | mount_point}: sfcfrmd may not exist

[Explanation]

A communications channel with sfcfrmd daemon could not be established.

[Action]

After confirming the state of sfcfrmd daemon by using the likes of the ps(1) command, contact local Customer Support.

E.4.4.13 ERROR: mount: 0018: special is already mounted, mount_point is busy, or the allowable number or mount points has been exceeded

[Explanation]

Special file special may have already been mounted, or the mount point mount_point may be in use.

[Action]

Please check the process that is used mountpoint by fuser(1M). Or check the file system that is used mount_point by mount(1M).

E.4.4.14 ERROR: mount: 0019: {special | mount_point}: Mount demand processing to sfcfrmd went wrong

[Explanation]

Mount processing request to sfcfrmd daemon has failed.

[Action]

After confirming the state of sfcfrmd daemon by using the likes of the ps(1) command, contact local Customer Support.

E.4.4.15 ERROR: mount: 0020: {special | mount_point}: Time out occurred in mount demand processing to sfcfrmd

[Explanation]

Timeout occurred for a mount processing request to sfcfrmd daemon.

[Action]

After confirming the state of sfcfrmd daemon by using the likes of the ps(1) command, contact local Customer Support.

E.4.4.16 ERROR: mount: 0025: The description form of vfstab is wrong

[Explanation]

The description format of /etc/vfstab is incorrect.

[Action]

Confirm the contents of /etc/vfstab.

E.4.4.17 ERROR: mount: 0026: {special | mount_point}: filesystem may not be created

[Explanation]

The specified file system was not registered in the management partition.

[Action]

After confirming that the file system has already been created, re-execute the mount_sfcfs(1M) command.

E.4.4.18 ERROR: mount: 0029: {special | mount_point}: self-node is already processing mount or umount

[Explanation]

In the self-node, mount or umount processing has already been performed.

[Action]

Please set time a little and execute a command again.

E.4.4.19 ERROR: mount: 0030: {special | mount_point}: mount_point need to be representative partition

[Explanation]

The special block device specified as a mount point was not a representation partition.

[Action]

Please specify a representation partition name and execute a command again.

E.4.4.20 WARNING: mount: 0027: mount_option mntopts is ignored, used vfs_mntopts in vfstab

[Explanation]

Although mount option mntopts has been specified as the mount_sfcfs(1M) command parameter, mount processing was performed with mount option vfs_mntopts, described by /etc/vfstab.

[Action]

To specify the mount option and perform mount processing, describe the mount option for the mount point in question in /etc/vfstab.

E.4.4.21 WARNING: mount: 0028: mount_option mntopts is ignored

[Explanation]

Although mount option mntopts has been adopted as the mount_sfcfs(1M) command parameter, it was ignored and mount processing was performed with no parameters.

[Action]

To specify the mount option and perform mount processing, describe the mount option for the mount point in question in /etc/vfstab.