PCI Hot Plug User's Guide I/O device edition - for Solaris(TM) Operating System -

3.2.2 Solaris 9 OS or later

This section describes the procedures to extend PCI cards on Solaris 9 OS or later systems.

If you use Fibre Channel Card (PW028FC3*/PW028FC4*/PW028FC5*), ensure the automap function is effective. Boot the system after modifying lpfc.conf.

# vi /kernel/drv/lpfc.conf <Return>

:
# If automap is set, SCSI IDs for all FCP nodes without
# persistent bindings will be automatically generated.
# If new FCP devices are added to the network when the system is down,
# there is no guarantee that these SCSI IDs will remain the same
# when the system is booted again.
# The bind method of the port is used as the binding method of
# automap devices to preserve SCSI IDs between link down and link up.
# If automap is 0, only devices with persistent bindings will be
# recognized by the system.
automap=1; <-- set to 1
:

---

3.2.2.1 Extension of PCI cards on non-redundant system

3.2.2.2 Extension of PCI cards with new redundant system

3.2.2.3 Extension of PCI cards to redundant system