Machine Administration Guide 2.6

3.3.6.4 Setting Monitoring Notification Information

This section describes how to perform the Setting Monitoring Notification Information operation.

For PRIMEPOWER900/1500/2500/HPC2500 models, this function is not supported.

Displaying the Setting Monitoring Notification Information menu

Operation

1. From the Hardware Monitoring Information menu, select [Setting Monitoring Notification Information].

   The Setting Monitoring Notification Information menu opens.

   

Output to the Console

The following describes how to operate the Output to the Console function:

Operation

1. From the Setting Monitoring Notification Information menu, select [Output to the console].

   The Output to the Console menu opens.

2. Enter the following information in the menu:
   • Notification Item

     In the CUI menu, no notification item can be selected. Specify whether a notification is to be issued for all items.

     To change each notification item individually, use the notification settings in the corresponding menus of the hardware monitoring information.

     In the GUI menu, the notification setting in the corresponding menu of the hardware monitoring information indicates whether the console is set as the notification destination.

     To change a notification item, select it and set it to "Valid" or "Invalid".

Sending Mail to the System Administrator

The following describes how to operate the Sending Mail to the System Administrator function:

Operation

1. From the Setting Monitoring Notification Information menu, select [Sending mail to the system administrator].

   The Sending Mail to the System Administrator menu opens.

2. Enter the following information in the menu:
   • Mail address

     Enter the mail address of the system administrator.

     To send a notification to multiple system administrators, separate their mail addresses with a comma ",".

   • Memo

     Enter supplementary information. Use this information when sending memos to the system administrator.

     A colon ":" cannot be entered.

   • Notification Item

     In the CUI menu, no notification item can be selected. Specify whether a notification is to be issued for all items.

     To change each notification item individually, use the notification settings in the corresponding menus of the hardware monitoring information.

     In the GUI menu, the notification setting in each menu of the hardware monitoring information indicates whether the system administrator is set as the notification destination.

     To change a notification item, select it and set it to "Valid " or "Invalid".

Sending Mail to the CE

The following describes how to operate the Sending Mail to the CE function:

Operation

1. From the Setting Monitoring Notification Information menu, select [Sending mail to the CE].

   The Sending Mail to the CE menu opens.

2. Enter the following information in the menu:
   • Mail address

     Enter the mail address of the CE.

     To send a notification to multiple CEs, separate their mail addresses with a comma ",".

   • Memo

     Enter supplementary information. Use this information when sending memos to the CE.

     A colon ":" cannot be entered.

   • Notification Item

     In the CUI menu, no notification item can be selected. Specify whether a notification is to be issued for all items.

     To change each notification item individually, use the notification settings in the corresponding menus of the hardware monitoring information.

     In the GUI menu, the notification setting in the corresponding menu of the hardware monitoring information indicates whether the CE is set as the notification destination.

     To change a notification item, select it and set it to "Valid" or "Invalid".