Machine Administration Guide 2.6

3.2.6.7 Notification Test

This section describes how to operate Notification Test.

Executing Notification Test does no affect any of the monitoring operations.

Displaying the Notification Test menu

Operation

1. From the Hardware Monitoring Information menu, select [Notification Test].

   The Notification Test menu opens.

   

Notification Test

The following describes how to operate the Notification Test function:

Operation

1. Select the test log level from the following three types:
   • ALARM
   • WARNING
   • NOTICE
2. Set up the test log in accordance with the menu.

   

   If the ALARM or WARNING level is selected, the associated error item is deleted from the Management of Hardware Error Event menu.

   

   After setting up the test log, check for the following events:

   • Verify that the following error message was recorded in the hardware error log and syslog:

     [Message:"FJSVmadm:X:TEST:SCF:Notification (This is a TEST log) occurred at MM DD hh:mm:ssTZ" (X=I,W,A)]

   • Verify that the XSCF's mail notification and Machine Administration's mail notification have been issued.