Machine Administration Guide 2.6

3.1.10.1 Display Current RCI Configuration

This section describes how to perform the Display Current RCI Configuration operation.

Operation

1. From the Remote Cabinet Interface (RCI) Administration menu, select [Display Current RCI Configuration].

   The RCI statuses of the local host are explained below.

   • RCI address

     RCI address of the main unit

   • Status

     RCI status

     	Active	: RCI active status
     	Mainte	: RCI maintenance mode in effect
     	Configuring	: RCI network construction in progress
     	ConfigError (reason)	: RCI network construction error
     		reason indicates the reason for the error.

     reason	Reason for error
     "Self Host Address Conflict"	Local address duplication error
     "Host Address Contradict"	Inconsistency between the host count and host addresses
     "RCI Address Contradict"	RCI address inconsistency
     "Can't assign new Address"	New registration impossible
     "Error in Configuring"	Error during installation
     "Self configuration RCI AddressConflict"	Error in self-configuration: RCI address duplicate
     "RCI Hardware Error"	RCI hardware error

   The following explains the list of the devices connected to RCI:

   • address

     RCI address

   • pwr

     Power status of the RCI device

     	ON	: Power-on status
     	OFF	: Power-off status

   • alm

     Alarm generation status

     	ALM	: Alarm generation
     	-	: No alarm

   • I/F

     I/F status of the RCI device

     ACT: Active

     INACT: Inactive

   • sys-phase

     OS status

     	power-off	: Power-off status
     	panic	: Panic status
     	shdwn-start	: Shutdown in progress
     	shdwn-cmplt	: Shutdown completed
     	dump-cmplt	: Dump completed
     	initializing	: Initial diagnosis in progress
     	booting	: Booting in progress
     	running	: In operation

   • ctgry

     RCI device category

     	Host	: Main unit
     	Rcic	: External power control device
     	Disk	: Disk unit
     	Linsw	: Line switching unit
     	Other	: Other devices

   • dev-cls

     RCI device class. Displayed as a 4-digit hexadecimal number.

   • sub-cls

     Subclass of the RCI device. Displayed as a 2-digit hexadecimal number.