Enhanced Support Facility 2.6 User's Guide

8.1 iompadm(1M)

NAME

iompadm - multi path control command

SYNOPSIS

/usr/opt/FJSViomp/bin/iompadm [-p] [-c fjmse] subcommand [parameter ...]

AVAILABILITY

FJSVse(or FJSVsec), FJSViomp

DESCRIPTION

iompadm(1M) on the duplicated console paths displays the status of communication paths composed of instances (the units of duplicated communication paths), and restores the communication path where a failure occurs.
You can display the status of communication paths or restore them using a combination of the specified subcommand and parameter.
A communication path is a path that is used for communications between a system serial port and System Management Console.
If in a partition, serial ports on the first and second system boards are used as the communication path by default.
The communication path names will be "/dev/fjse/0" and "/dev/fjse/1."

OPTIONS

The following options are available:

-c fjmse

Specifies a class name. "fjmse" must be specified for a console class.

-p

Displays the logical and physical device names of a communication paths.
If this option is omitted, only the logical devices will be displayed.

subcommand

"Table 8.1 Subcommand List" lists the subcommands you can specify and gives their descriptions.

[Table 8.1 Subcommand List]

Subcommand	Description
Info	Displays the configuration information of the specified instance or all instances, and the status of the communication paths.
Status	Displays the status of the specified communication path.
Ident	Displays the class to which the specified communication path belongs.
Probe	Displays the instance and class to which the specified communication path belongs.
Recover	Restores the specified communication path.
Start	After the recover subcommand is running, this subcommand makes the specified communication path available for communicating.
Active	Changes the status of the specified communication path to use.
Version	Displays the version information for this product.
Help	Displays the usage of the iompadm command.

parameter

Specifies a parameter in combination with the subcommands. For more information, see "8.1.1 iompadm subcommand."

EXIT STATUS

This command returns the following values:

0

Ended normally

> 0

Error

---

8.1.1 iompadm subcommand