Enhanced Support Facility 2.6 User's Guide

7.3.2 PRIMEPOWER 900/1500/2500/HPC2500

• The device name of the serial port will be "/dev/term/fa001,/dev/term/fa002," etc.
  Because the number of this device name is allocated from the instance number of driver, this number does not necessarily correspond to the slot number of the system board.
• Do not change the setting of port monitor, etc. to the serial port for the console.
  Because the physical device of the serial port used for the console is the physical device path which are linked from logical device under /dev/fjse directory, the logical devices under /dev/term and /dev/cua, and /dev/se_hdlcX files, which link to above-mentioned physical device path, are devices used for the console.
• Except for the serial port for consoles, five serial ports can be used by the user.
  However, keep in mind that it is necessary to stop beforehand the application which is using the serial port of the system board or the PCI/Disk BOX in order to disconnect the system board by DR.
• The devices which is not used as the console path may use for the FJVTS and SunVTS.