PRIMECLUSTER Installation and Administration Guide 4.1 (for Linux) |
Contents
Index
![]() ![]() |
Part 2 Installation | > Chapter 5 Building a Cluster | > 5.1 Initial Cluster Setup | > 5.1.2 Setting Up the Shutdown Facility |
Check the information of the shutdown agent to be used.
Check the shutdown agent information before cluster initialization.
If an MMB is being used, check the following settings:
Check the settings for the user who uses RMCP to control the MMB. Log in to MMB Web-UI, and check the settings from the "Remote Server Management" window of the "Network Configuration" menu.
If the above settings have not been set, set up the MMB so that the above settings are set.
Jot down the following information related to the MMB:
*1) The user must be granted the Admin privilege.
The MMB units have two types of users:
- User who controls all MMB units
- User who uses RMCP to control the MMB
The user to be checked here is the user who uses RMCP to control the MMB. Be sure to check the correct type of user.
For information on how to set up the MMB and check the settings, refer to the "PRIMEQUEST 480/440 Reference Manual: GUI/Commands."
Contents
Index
![]() ![]() |