| PRIMECLUSTER Global Disk Services Configuration and Administration Guide 4.1 (Solaris(TM) Operating System) |
|
Contents
|
| Appendix E GDS Messages | > E.5 Operation Management View Messages |
An error given in details occurred when executing the command.
Identify the cause referring to the command line output. When you cannot identify the cause, contact your local customer support.
The input class name is already defined.
Click <Yes> to add the disk to the specified class, or <No> to register the disk with another class.
The input group name is already defined.
Click <Yes> to additionally connect the disk with the specified group, or <No> to connect the disk with another group.
All of the disk data will be lost if a physical disk is registered with the class.
Click <Yes> to register the physical disk, or <No> to cancel.
All of the volume data will be lost if you remove the volume.
Click <Yes> to remove the volume, or <No> to cancel.
A volume that cannot be accessed will be recovered.
Click <Yes> to recover the volume, or <No> to cancel.
A normal disk was selected for swapping.
Click <Yes> to swap the disks, or <No> to cancel.
With automatic configuration settings, disks connected to different I/O adapters can be mirrored, and on that account automatic configuration settings cannot be adopted when all the selected disks are connected to one I/O adapter.
From the Settings menu, select the desired configuration settings (Class Configuration, Group Configuration, Volume Configuration) and configure.
Data in the disk you selected for automatic configuration will be lost.
Click <Yes> to continue, or <No> to cancel.
To swap the disks, the relative slices will stop. Detaching the disk will affect data reliability. Continue?
When physical disks are swapped, the relative slices will stop operating until the restore is complete, and the reliability of the volume will fall.
Click <Yes> to swap physical disks, or <No> to cancel.
All the data in the physical disk will be lost. Continue?
When a physical disk is restored, data in the physical disk will be lost.
Click <Yes> to restore the physical disk, or <No> to cancel.
Detaching the slice will affect data reliability. Continue?
Detaching a slice will lower reliability.
Click <Yes> to detach the slice, or <No> to cancel.
All the data in the slice will be lost. Continue?
When a slice is attached, data in the slice will be overwritten.
Click <Yes> to attach the slice, or <No> to cancel.
The volume will be stopped.
Click <Yes> to stop volume, or <No> to cancel.
Removing all the disks in a class will result in removing the class as well.
Click <Yes> to remove class, or <No> to cancel.
Removing all the disks in a group will result in removing the group as well.
Click <Yes> to remove group, or <No> to cancel.
A file system will be created on the selected volume. If you continue, all the data in the volume will be lost.
Click <Yes> to create a file system, or <No> to cancel.
The selected volume will be unmounted and mount information for the volume will be deleted. If it is deleted, the volume can no longer be used as a file system.
Click <Yes> to remove the file system, or <No> to cancel.
Commands other than those from GDS Management View changed the GDS configuration information.
Click <Yes> to update the GDS Management View display, or <No> to cancel.
In order to swap physical disks, an unused disk or a spare disk will be detached. This will not affect the volume.
Click <Yes> to swap the physical disks, or <No> to cancel.
The volume cannot be removed because of a file system configured on the volume.
Remove the file system from the [File System Configuration] screen and then remove the volume.
Physical disks may not have been swapped.
Click <Yes> to attach the physical disk, or <No> to cancel.
The status of physical disks connected to the system will be updated. During the update, operations from GDS Management View are unavailable.
Click <Yes> to update the physical disk information, or <No> to cancel.
Renaming the class containing a volume with a file system was attempted.
Renaming the class will result in changing the access path. First delete the file system.
Renaming the volume with a file system was attempted.
Renaming the volume will result in changing the access path. First delete the file system.
Unmirroring a system disk was attempted when the mirrored disk was abnormal.
First swap the abnormal physical disk for another. After recovering the physical disk, unmirror the system disk.
<Unmirror> was selected in the [Unmirror System Disk] screen.
Click <Yes> to unmirror the system disk, or <No> to cancel.
While configuring system disk mirroring, a volume in process of synchronization copying was detected.
Click <OK> and close the message. From the GDS Management View screen, monitor the root class volume in process of synchronization copying. Verify that the volume status changes from "warnings" to "active," and try configuring mirroring for the system disk again.
System disk mirroring has not been configured yet.
Click <Yes> to rewrite the mount information and finish the configuration, or <No> to cancel.
The detached slice will be made inaccessible.
Click <Yes> to restrict access to the slice, or <No> to allow access.
The slice being inaccessible as a result of stopping the slice will be made accessible.
Click <Yes> to allow access to the slice, or <No> to restrict access.
The resynchronization copying of the slice will be cancelled. The copying cannot be resumed from the point where it stops.
Click <Yes> to cancel resynchronization copying, or <No> not to cancel.
Copying of the slice will be performed to synchronize the data of the slices of the volume.
Copying of an interrupted slice will resume as well.
Click <Yes> to start (resume) resynchronization copying, or <No> not to start (resume).
A group in the "root" class is going to be removed.
Click <Yes> to remove the group, or <No> to cancel.
An object error was detected on another node node configuring the cluster system.
Click <Yes> to display the information about the node with the error, or <No> not to display.
An object error was detected on another node node configuring the cluster system.
Check the node on which the error was detected for the status after the current operation ends.
Creating a file system failed since available supported file systems cannot be found.
Install supported file systems, and then create a file system.
All of the local disks are already registered with the class.
There is no resolution.
The physical disk is being handled at maintenance work and cannot be included into GDS management.
See the maintenance state of the physical disk. For details, see "Machine Administration Guide."
If the proxy is joined, its contents are overwritten by data of the master volume.
Click <Yes> to join the proxy, or <No> to cancel the process.
The master group and the proxy group will be joined.
Click <Yes> to join the proxy, or <No> to cancel the process.
The master and the proxy will be related.
Click <Yes> to relate the proxy, or <No> to cancel the process.
The relationship between the master and the proxy will be canceled.
Click <Yes> to break the relationship, or <No> to cancel the process.
If the proxy is rejoined, its contents are overwritten by data of the master.
Click <Yes> to rejoin the proxy, or <No> to cancel the process.
Slices comprising the master and the proxy are switched.
Click <Yes> to switch the slices, or <No> to cancel the process.
|
Contents
|