| PRIMECLUSTER Global Disk Services Configuration and Administration Guide 4.1 (Solaris(TM) Operating System) |
|
Contents
|
| Appendix E GDS Messages | > E.3 Daemon Messages |
volume info:devno(maj,min)=v_devno(v_maj,v_min)
device info:devno(maj,min)=p_devno(p_maj,p_min)
devname=device,
error info: blk in disk=blknodk, blk in slice=blknosl,
length=length
Read request sent to slice object.volume in status status was unsuccessful, but was restored by writeback process.
Writeback is a process to read data from other slices in the event of a read error.
parameter='param'
old ='old_value'
new ='new_value'
Parameter param value stored in NVRAM (non-volatile memory) on the body unit was updated from old_value to new_value.
Although just resynchronization process on volume will be temporarily disabled, it will automatically attempt recovery.
Connecting spare disk disk to group instead of disk was unsuccessful.
The attempt to connect spare disk disk to the highest level group hgroup in place of group lgroup failed.
Connected spare disk disk to group instead of disk.
Spare disk disk was connected to the highest level group hgroup in place of group lgroup.
Free blocks of group were reduced.
Just resynchronization process of volume was resumed.
NVURM read request of volume sent from disk was successful. Just resynchronization process will be resumed.
NVURM is volume update area map information stored in the disk for just resynchronization.
NVURM was not retrieved. Entire copying of volume will start.
Opening disk physical slice pslice exclusively was unsuccessful.
Disk ID information of disk is invalid. disk will be automatically disabled.
Disabled disk was enabled.
Started synchronization copying process of volume.
Started just resynchronization process of volume.
Canceled synchronization copying of volume.
Canceled just resynchronization process of volume.
Synchronization copying process of volume completed successfully.
Just resynchronization process of volume completed successfully.
Updating configuration database was unsuccessful since all (or majority of) disks registered with class was unavailable. Usually, class will be closed following this message.
The sdxservd daemon started up. GDS will be started.
All volumes under local class have been started.
All volumes under root class have been started.
All GDS services were stopped in response to a shutdown request.
Could not open class database file while booting the system. Will automatically attempt recovery.
Corrupted class database file was detected while booting the system. Will automatically attempt recovery.
Could not open class file class while booting the system. Will automatically attempt recovery.
Corrupted class file class was detected while booting the system. Will automatically attempt recovery.
Class database file was updated.
Class file class was updated.
Could not write to class database file. Will automatically attempt recovery.
Could not write to class file class. Will automatically attempt recovery.
psdextree
Opening or reading private slice psdextree was unsuccessful, and could not check configuration database ID information of class.
psdextree
Opening or reading private slice psdextree was unsuccessful, and could not check configuration database of class.
psdextree ...
Since there was a check-sum error in the configuration database, private slice psdevtree... was not used as the configuration database for class class.
psdextree ...
The configuration database for class class stored on private slice psdevtree... was determined to be invalid in a validity check.
psdextree ...
The valid configuration database for class class was determined. psdevtree... is the private slice storing the valid configuration database.
class will be started.
psdextree
Updating a replica of the configuration database for class class stored on private slice psdevtree failed.
psdextree ...
A replica of the configuration database for class class was relocated onto private slice psdevtree...
Disconnected spare disk disk from group.
Number of free blocks in group increased.
Function pthread_create() terminated abnormally.
Opening configuration parameter filename was unsuccessful.
Reading configuration parameter files was unsuccessful.
Unexpected data was received from sfdsk driver and was ignored.
Unexpected event was received from sfdsk driver and was ignored.
details displays the details about the event.
class on node was closed.
cmdline
Command cmdline was executed.
cmdline
Processing cmdline is complete.
cmdline
The cmdline command is about to be executed.
cmdline
The cmdline command failed.
Class resource status on remote node node was changed from old-status to new-status.
Class resource status on current node node was changed from old-status to new-status.
Starting volumes that belong to the class class was completed on the node node. type is the class type attribute.
Starting and putting on standby volumes that belong to the class class was completed on the node node. type is the class type attribute.
Stopping and putting on standby volumes that belong to the class class was completed on the node node. type is the class type attribute.
Stopping volumes that belong to the class class was completed on the node node. type is the class type attribute.
Due to the occurrence of an abnormal exclusive control between cluster system nodes, the spare disk could not be connected.
Could not connect spare disk due to insufficient number of valid configuration databases.
Spare disk disk could not be connected since the hot spare is disabled.
Closed class class on remote node node will be recovered.
Attempted recovery of closed class class on remote node node. Recovery was unsuccessful since the class was also closed on current node node.
Recovering closed class class was unsuccessful.
Recovering closed class class was successful.
Started node-down recovery on remote node node.
Started shutdown recovery on remote node node.
Recovering node-down was unsuccessful since class was in closed status on current node.
Recovering shutdown was unsuccessful since class was in closed status on current node.
Recovering class from node-down was unsuccessful.
Recovering class from shutdown was unsuccessful.
Recovering class from node-down completed successfully.
Recovering class from shutdown completed successfully.
Updating error information of slice object.volume was unsuccessful due to class in closed status.
Disabling just resynchronization process on volume was unsuccessful due to class in closed status.
Detaching slice object.volume was unsuccessful due to class in closed status.
Restarting volume was unsuccessful due to class in closed status.
Open request sent to slice object.volume in status status terminated abnormally.
Trying to identify the class master for shared class class.
The master for shared class class has been identified as node node.
Searching the master for shared class class.
The master for shared class class was found to be node node.
The master for shared class class cannot be found.
Trying to obtain master privilege for shared class class.
The master information for shared class class has been broadcast to the remote nodes.
Received master confirmation for shared class class from remote node node.
Waiting for event operations in process.
Event operations in process have been completed.
Trying to release master privilege for shared class class.
Master privilege for shared class calss has been released.
Copying between proxy volume proxy and master volume with the OPC function started. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
Copying between proxy volume proxy and master volume with the OPC function is completed. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
Copying between proxy volume proxy and master volume with the OPC function was cancelled. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
EC session between proxy volume proxy and master volume started. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
Copying between proxy volume proxy and master volume with the EC function is completed. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
Copying between proxy volume proxy and master volume with the EC function was cancelled. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
EC session between proxy volume proxy and master volume with the EC function was stopped. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
EC session between proxy volume proxy and master volume with the EC function has been temporarily suspended. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
EC session between proxy volume proxy and master volume with the EC function was resumed. "source" specifies the original slice name, "target" the mirror slice name, and "class" the name of the class to which the original slice and mirror slice belong.
BCV pair between the proxy group proxy and the master group was established. "STD" is the disk name of the standard device, "BCV" is the disk name of the BCV device, and "class" is the name of the class to which the standard and BCV devices belong.
Copying between the proxy group proxy and the master group with TimeFinder is complete. "source" is the name of the copy source disk, "target" is the name of the copy destination disk, and "class" is the name of the class to which the copy source and destination disks belong.
Copying between the proxy group proxy and the master group with TimeFinder was canceled. "source" is the name of the copy source disk, "target" is the name of the copy destination disk, and "class" is the name of the class to which the copy source and destination disks belong.
BCV pair between the proxy group proxy and the master group was canceled. "STD" is the disk name of the standard device, "BCV" is the disk name of the BCV device, and "class" is the name of the class to which the standard and BCV devices belong.
BCV pair between the proxy group proxy and the master group was split. "STD" is the disk name of the standard device, "BCV" is the disk name of the BCV device, and "class" is the name of the class to which the standard and BCV devices belong.
BCV pair between the proxy group proxy and the master group was re-established. "STD" is the disk name of the standard device, "BCV" is the disk name of the BCV device, and "class" is the name of the class to which the standard and BCV devices belong.
SRDF pair between the proxy group proxy and the master group was established. "source" is the name of the source disk, "target" is the name of the target disk, and "class" is the name of the class to which the source and target disks belong.
Copying between the proxy group proxy and the master group with SRDF is complete. "source" is the name of the copy source disk, "target" is the name of the copy destination disk, and "class" is the name of the class to which the copy source and destination disks belong.
Copying between the proxy group proxy and the master group with SRDF was canceled. "source" is the name of the copy source disk, "target" is the name of the copy destination disk, and "class" is the name of the class to which the copy source and destination disks belong.
SRDF pair between the proxy group proxy and the master group was canceled. "source" is the name of the source disk, "target" is the name of the target disk, and "class" is the name of the class to which the source and target disks belong.
SRDF pair between the proxy group proxy and the master group was split. "source" is the name of the source disk, "target" is the name of the target disk, and "class" is the name of the class to which the source and target disks belong.
SRDF pair between the proxy group proxy and the master group was re-established. "source" is the name of the source disk, "target" is the name of the target disk, and "class" is the name of the class to which the source and target disks belong.
The file file was not found.
|
Contents
|