| PRIMECLUSTER Global File Services Configuration and Administration Guide 4.1 (Linux) |
|
Contents
Index
|
| Appendix A List of Messages | > A.5 GFS Shared File System Script Messages |
file_name is not executable.
See "Installation Guide for PRIMECLUSTER(TM) for Linux(TM) Environment" and reinstall the package.
The status of the GDS volume that was specified as the management partition is not ACTIVE. Or, there is a possibility that the GDS volume is deleted without deleting node configuration information from the management partition by sfcsetup -d on the target node when the use of GFS is stopped.
Check whether the volume exists by executing the following procedure:
# ls -l management_partition
Create a volume according to the instructions in "Operation" of the " PRIMECLUSTER Global Disk Services Configuration and Administration Guide."
Restore the management partition according to the instructions in "Backup and restore of the management partition information" in this manual.
See "Management Partition" and set up the management partition.
If the volume status is not ACTIVE, change the status to ACTIVE. For instructions on how to change the volume status, see the "Operation" of the "PRIMECLUSTER Global Disk Services Configuration and Administration Guide."
Check whether the volume exists by executing the following procedure:
# ls -l management_partition
Delete information on the deleted GDS volume by executing the following procedures:
1. Create a temporary GDS volume of 40 MB or more. (GDS volume name is arbitrary)
2. sfcsetup -c temporary_GDS_volume (GDS volume name made at 1.)
3. sfcsetup -a temporary_GDS_volume (GDS volume name made at 1.)
4. sfcsetup -d
Delete the node configuration information from the management partition by executing the following procedures:
1. Set the volume status to ACTIVE.
For instructions on how to change the volume status, see "Operations" of the "PRIMECLUSTER Global Disk Services Configuration and Administration Guide."
2. See "Configuring the Management Partition and Starting the File System Monitoring Mechanism" and delete the node configuration information from the management partition.
sfcfrmd daemon failed booting.
Check the error message of sfcfrmstart displayed on the console, and cope with it about the error message with reference to "sfcfrmstart command".
The daemon could not be stopped.
Collect the diagnostic data with pclsnap and contact local Customer Support.
Loading of module were failed.
Please use the ls command and check whether module exists. When it does not exist, see "PRIMECLUSTER(TM) Installation Guide for Linux(TM) Environment" to re-install packages. When it does exist, collect the crash dump and the diagnostic data with pclsnap, and contact your local Customer Support.
Unloading of module were failed.
Collect the crash dump and the diagnostic data with pclsnap, and contact your local Customer Support.
Cluster resource management is not started.
Please follow the procedure in an error message of the Cluster resource management outputted to /var/log/messages. For details, see the "Resoucce Database Messages" of "PRIMECLUSTER(TM) Cluster Foundation Configuration and Administration Guide".
|
Contents
Index
|