PRIMECLUSTER Web-Based Admin View Operation Guide

7.1 Network address

The Network address(IP address) corresponding to the output node name from "uname -n" at its installation is automatically set to the IP address used by Web-Based Admin View.There are following two usages in network address used by Web-Based Admin View:The network address used by Web-Based Admin View has following two usages:

• The IP address or host name for identifying own host (mip)

  This is used for communication among management servers and monitoring nodes.

• The IP address used for a client (httpip)

  WWW server's IP addresses or host name.

Normally, these IP addresses are identical. If you need to modify the network environment to multi-network between server and client by classified use, set up the IP address respectively. For the detail, refer to "Multi-network between server and client by classified use."

Take the following steps to modify these IP addresses:

1. Stop Web-Based Admin View running on the management server or monitoring node.

   Refer to "Stop."

2. Set up IP address.

   Execute the following command:

   # /etc/opt/FJSVwvbs/etc/bin/wvSetparam mip <IP address for identifying own host>

   # /etc/opt/FJSVwvbs/etc/bin/wvSetparam httpip <IP address used for client>

   For example, if you need to change the <IP address for identifying own host> to "100.100.100.100", execute the following:

   # /etc/opt/FJSVwvbs/etc/bin/wvSetparam mip 100.100.100.100

   Similarly, if you need to change the <IP address used for client> to "100.100.100.100", execute the following:

   # /etc/opt/FJSVwvbs/etc/bin/wvSetparam httpip 100.100.100.100

3. Change a management server.

   If the modified monitoring node acts as a management server, modify the management server settings. Refer to "Management server,"

4. Restart Web-Based Admin View on the management server or monitoring node on which the IP address is changed.

   Refer to "Restart".

<IP address used for client> might not be required to modify when <IP address for identifying own host> and <IP address used for client> is different. httpip is described<IP address used for client>, mip is described <IP address for identifying own host>.