Dynamic Reconfiguration User's Guide 2.5.1

6.2.2.5 I/O Messages

Message	I/O devices active
Cause	Detect active I/O device.
Remedy	Confirm that all I/O devices are not in use and repeat the DR operation. If this error message appears again, please contact our customer service.
Output	Console and Standard Output

Message	###### (major# #) not hotplugable
Cause	This driver dose not support DR.
Remedy	After closing this driver and unloading by modunload(1M) command, repeat the action.
Output	Console and Standard Output

Message	failed to attach I/O node branch to node tree. (error=#)
Cause	Failed to connect the I/O to the OS.
Remedy	Repeat the action. If this error message appears again, please contact our customer service.

Message	failed to detach I/O node branch (######) from the node tree. (error=#)
Cause	Failed to remove the I/O node from OS.
Remedy	The failed I/O device is probably still activated. After deactivating the device, repeat the action. For more details, please refer to "2.3.3.1 I/O Device Administration". If this error message appears again, please contact our customer service.

Message	###### (driver ###### major# #) is referenced
Cause	An I/O device on the outgoing system board is still referenced.
Remedy	Confirm that the displayed I/O device is not in use and repeat the DR operation. If this error message appears again, please contact our customer service.

Message	sfdr_disconnect: master TOD present on board #
Cause	Internal data conflict is detected. DR driver internal data conflict may be the cause.
Remedy	Please contact our customer service.
Output	Console and Standard Output

Message	DR: suspending drivers... FAILED to suspend X
Cause	While suspending drivers before disconnecting a system board~with kernel memory, failed to suspend the device.
Remedy	Repeat the action. If this error message appears again, please contact our customer service.

Message	DR: suspending drivers... suspending X FAILED to resume X
Cause	While resuming drivers after disconnecting a system board~with kernel memory, failed to resume the device.
Remedy	Please contact our customer service.